Difference between revisions of "Minutes of the code management group meeting 2021-02-26"

From UKCA
 
(14 intermediate revisions by 3 users not shown)
Line 7: Line 7:
 
'''Meeting via Zoom - details have been emailed'''
 
'''Meeting via Zoom - details have been emailed'''
   
'''Met Office:''' AJH
+
'''Met Office:''' AJH, NC, CH, FM, JH, MG, AH, MD
   
'''Cambridge:'''
+
'''Cambridge:''' NLA, SAN
   
'''Leeds:'''
+
'''Leeds:''' MR, DG, GM
   
'''Reading:'''
+
'''Reading:''' NB
   
'''Lancaster:'''
+
'''NIWA:''' OM
   
'''Edinburgh:'''
+
'''CSIRO:''' AL
   
'''UEA:'''
+
'''Apologies:''' FOC, MS
   
 
==Actions from this meeting ==
'''NIWA:'''
 
   
  +
# (ongoing) LA to put <code>C_SPECIES</code> definitions in the ''Redundant Code'' table (short-term), and switch to use <code>M_SPECIES</code> instead. Talk with JH about AQUM tests and requirements. Note that there will be problems with exoplanets and >100km top configs where M_air not constant. LA to make a branch and progress.
'''CSIRO:'''
 
 
# (ongoing) '''[[Monsoon users MASS data]] Management'''. Points-of-contact identified and list of UMUI jobs created up to Dec-2014 circulated to most centres for review.
 
  +
# (ongoing) GM (supported by KP/MY/AH) has made a table on UKCA wiki documenting [[GLOMAP versions]]. ALL to read, GM & others to update table.
'''Apologies:''' FOC, MS, AH
 
  +
# (ongoing) JH to update API document to reflect the UMvn11.9 release
 
  +
# (new) AJH to investigate which UKCA (and GLOMAP_CLIM) options not protected under rose-stem.
==Actions from this meeting ==
 
  +
# (new) NLA to chat with OM offline regarding Solar Cycle routine
  +
# (new) NLA to contact JM regarding bug #128 (Bug in UKCA stratospheric chemistry diagnostics)
  +
# (new) AJH to take on bug #129 (warning messages in ukca_radaer_lut_in) as has to change routine anyway for LFRic port
  +
# (new) NLA to make new table for code not tested listing tickets for rose-stem tests that need to be added.
  +
# (new) MR to contact Leighton Regayre regarding flight-track work. Duncan Watson-Paris might have something too.
  +
# (new) NLA to send round Doodle Poll for end of April.
   
 
== Minutes ==
 
== Minutes ==
Line 34: Line 40:
   
 
# (ongoing) LA to put <code>C_SPECIES</code> definitions in the ''Redundant Code'' table (short-term), and switch to use <code>M_SPECIES</code> instead. Talk with JH about AQUM tests and requirements. Note that there will be problems with exoplanets and >100km top configs where M_air not constant. LA to make a branch and progress for vn11.6.
 
# (ongoing) LA to put <code>C_SPECIES</code> definitions in the ''Redundant Code'' table (short-term), and switch to use <code>M_SPECIES</code> instead. Talk with JH about AQUM tests and requirements. Note that there will be problems with exoplanets and >100km top configs where M_air not constant. LA to make a branch and progress for vn11.6.
  +
#* Ongoing
# (ongoing) '''[[Monsoon users MASS data]] plan''' : Points-of-contact identified and list of UMUI jobs created up to Dec-2014 circulated to most centres for review. Suggest keeping this item on Agenda.
 
  +
# (ongoing) '''[[Monsoon users MASS data]] Management'''
  +
#* Status: ''Points-of-contact identified and list of UMUI jobs created up to Dec-2014 circulated to most centres for review''.
  +
#* Leave open until first round completed
 
# (ongoing) GM (supported by KP/MY/AH) has made a table on UKCA wiki documenting [[GLOMAP versions]]. ALL to read, GM & others to update table.
 
# (ongoing) GM (supported by KP/MY/AH) has made a table on UKCA wiki documenting [[GLOMAP versions]]. ALL to read, GM & others to update table.
  +
#* GM has a ticket to take some code back.
  +
#* There is also a GLOMAP Dust ticket, necessary for UKCA consolidation away from CLASSIC, as only UKCA will be ported to LFRic.
  +
#* Leave open
 
# (ongoing) NLA to make a ticket to add N48 Linux and update EXP test
 
# (ongoing) NLA to make a ticket to add N48 Linux and update EXP test
  +
#* '''Closed'''
 
# (ongoing) NLA to contact AJH/GM offline regarding coupling StratTrop to GLOMAP-CLIM
 
# (ongoing) NLA to contact AJH/GM offline regarding coupling StratTrop to GLOMAP-CLIM
  +
#* '''Closed'''. Might align with work of GM/SD
 
# (ongoing) NLA to contact GF about bug #109 (Bug in dry deposition of CH4 for 13/17/27 tiles)
 
# (ongoing) NLA to contact GF about bug #109 (Bug in dry deposition of CH4 for 13/17/27 tiles)
  +
#* '''Closed'''
 
# (new) NLA to remove ''Old'' (non-interactive) Dry deposition scheme from the Redundant Code table
 
# (new) NLA to remove ''Old'' (non-interactive) Dry deposition scheme from the Redundant Code table
  +
#* '''Closed'''
 
# (ongoing) JH, NC, LA, FOC, OM (and possibly others) to discuss the need for data from 2-D Cambridge model as well as other top-boundary options for tropospheric configurations. NLA to check with FOC & OM
 
# (ongoing) JH, NC, LA, FOC, OM (and possibly others) to discuss the need for data from 2-D Cambridge model as well as other top-boundary options for tropospheric configurations. NLA to check with FOC & OM
  +
#* FastJX rates have been updated as part of StratO3 work. FJX formatting differences to get in the UM. Cloud-J is also available to be incorporated if desired.
  +
#* No-one can run the 2D model any more. 2D model not working “off the shelf”. API work can still progress. NLA to open ticket for rose-stem test, NC to progress API ticket.
  +
#* '''Closed'''
 
# (new) AJH to take ticket [https://code.metoffice.gov.uk/trac/um/ticket/5918 UM:#5918] (bug #129, "Warning messages in ukca_radaer_lut_in")
 
# (new) AJH to take ticket [https://code.metoffice.gov.uk/trac/um/ticket/5918 UM:#5918] (bug #129, "Warning messages in ukca_radaer_lut_in")
  +
#* '''Closed'''
 
# (new) JH to update API document to reflect the UMvn11.8 release
 
# (new) JH to update API document to reflect the UMvn11.8 release
  +
#* Ongoing - do for UMvn11.9 release
 
# (new) NLA to email Adrian Lock or Ian Boutle regarding Bug #131 ("Invalid surface roughness input to aerosol dry deposition over land")
 
# (new) NLA to email Adrian Lock or Ian Boutle regarding Bug #131 ("Invalid surface roughness input to aerosol dry deposition over land")
  +
#* MD has opened a ticket and will progress with suggested replacement STASH code. Should cc GM
  +
#* '''Closed'''
 
# (new) AJH to re-write descriptions of Priorities #1 & #7.
 
# (new) AJH to re-write descriptions of Priorities #1 & #7.
  +
#* Ongoing
 
# (new) NLA to put Dry Deposition down as a high(ish) priority.
 
# (new) NLA to put Dry Deposition down as a high(ish) priority.
  +
#* '''Closed'''
 
# (new) NLA to send round Doodle poll for February 2021.
 
# (new) NLA to send round Doodle poll for February 2021.
  +
#* '''Closed'''
   
 
==== Standing actions ====
 
==== Standing actions ====
Line 77: Line 103:
 
| 109 || Bug in dry deposition of CH4 for 13/17/27 tiles || [https://code.metoffice.gov.uk/trac/um/ticket/4913 UM:#4913] || '''Gerd Folberth''' || To be Lodged after 10.6 <br/> Gerd noted unusual CH4 output in CMIP6 runs. <br/> May need a rose stem test for H2 and CH4 drdydep code lodged at [https://code.metoffice.gov.uk/trac/um/ticket/4157 UM:#4157] <br/> Makes a huge difference to CH4. Needs testing. AJH or GF will do during vn11.4, progress for vn11.6. May need UKESM1 approval. <br/> Code is difficult to understand. AJH thinks GarryH is aware of this problem.<br/> LA to ask GF to add more details <br/> GF has emailed. LA to update wiki pages (see below) <br/> Only impacts emission driven runs. <br/> LA to check with Gerd about this issue <br/> NLA to chase GF ||
 
| 109 || Bug in dry deposition of CH4 for 13/17/27 tiles || [https://code.metoffice.gov.uk/trac/um/ticket/4913 UM:#4913] || '''Gerd Folberth''' || To be Lodged after 10.6 <br/> Gerd noted unusual CH4 output in CMIP6 runs. <br/> May need a rose stem test for H2 and CH4 drdydep code lodged at [https://code.metoffice.gov.uk/trac/um/ticket/4157 UM:#4157] <br/> Makes a huge difference to CH4. Needs testing. AJH or GF will do during vn11.4, progress for vn11.6. May need UKESM1 approval. <br/> Code is difficult to understand. AJH thinks GarryH is aware of this problem.<br/> LA to ask GF to add more details <br/> GF has emailed. LA to update wiki pages (see below) <br/> Only impacts emission driven runs. <br/> LA to check with Gerd about this issue <br/> NLA to chase GF ||
 
|-
 
|-
| 110 || UKCA solar-cycle routine does not pass NRUN-CRUN test || [https://code.metoffice.gov.uk/trac/um/ticket/4828 UM:#4828] || '''Luke Abraham''' || To be Lodged after 11.5 <br/> Have a solution. <br/> Solution is a bit tricky to check the logic correctly. <br/> Currently testing. May not make vn11.7. <br/> Will not make UMvn11.7 - need to analyse runs to understand what is going on <br/> NLA to investigate further ||
+
| 110 || UKCA solar-cycle routine does not pass NRUN-CRUN test || [https://code.metoffice.gov.uk/trac/um/ticket/4828 UM:#4828] || '''Luke Abraham''' || To be Lodged after 11.5 <br/> Have a solution. <br/> Solution is a bit tricky to check the logic correctly. <br/> Currently testing. May not make vn11.7. <br/> Will not make UMvn11.7 - need to analyse runs to understand what is going on <br/> NLA to investigate further || '''ACTION:''' NLA to chat with OM offline
 
|-
 
|-
| 119 || Incorrect calculation for gridbox area - only affects GLOMAP-mode diagnostics || [https://code.metoffice.gov.uk/trac/um/ticket/5506 um:#5506] || || Calculation of <code>volume</code> appears correct, but <code>area</code> is not. This calculation is missing the factor <code>fv_cos_theta_latitude</code> so will not cause area to tend towards zero at the poles. It also seems to use an unnecessary approximation to the latitude difference (based on <code>sinv_latitude</code>) which may break down at high latitudes. The calculation should perhaps be consistent with subsequent <code>volume</code> calculation but without the <code>delta_r</code> factor. This will likely only affect diagnostics calculated in <code>ukca_emiss_diags_mode</code>, where it is used to convert from kg/m2/s to mol/gridbox/s, although it is also printed out in <code>ukca_aero_ctl</code>. <br/> JH spotted. Just diagnostic affected. <br/> LA to open a ticket. cc JM, NC <br/> LA to update with MOSRS ticket <br/> No owner yet <br/> Needs testing. ||
+
| 119 || Incorrect calculation for gridbox area - only affects GLOMAP-mode diagnostics || [https://code.metoffice.gov.uk/trac/um/ticket/5506 um:#5506] || || Calculation of <code>volume</code> appears correct, but <code>area</code> is not. This calculation is missing the factor <code>fv_cos_theta_latitude</code> so will not cause area to tend towards zero at the poles. It also seems to use an unnecessary approximation to the latitude difference (based on <code>sinv_latitude</code>) which may break down at high latitudes. The calculation should perhaps be consistent with subsequent <code>volume</code> calculation but without the <code>delta_r</code> factor. This will likely only affect diagnostics calculated in <code>ukca_emiss_diags_mode</code>, where it is used to convert from kg/m2/s to mol/gridbox/s, although it is also printed out in <code>ukca_aero_ctl</code>. <br/> JH spotted. Just diagnostic affected. <br/> LA to open a ticket. cc JM, NC <br/> LA to update with MOSRS ticket <br/> No owner yet <br/> Needs testing. || GM will have a look, but can’t take it on
 
|-
 
|-
 
| 124 || H2 and N2 cannot be set for RCP and WMOA1 scenario routines || [https://code.metoffice.gov.uk/trac/um/ticket/5620 UM:#5620] || '''Mohit Dalvi''' || Values are hard-wired in the code and cannot be changed without a branch <br/> Will be handled at UM11.8 <br/> At least for the next version ||
 
| 124 || H2 and N2 cannot be set for RCP and WMOA1 scenario routines || [https://code.metoffice.gov.uk/trac/um/ticket/5620 UM:#5620] || '''Mohit Dalvi''' || Values are hard-wired in the code and cannot be changed without a branch <br/> Will be handled at UM11.8 <br/> At least for the next version ||
 
|-
 
|-
| 128 || Bug in UKCA stratospheric chemistry diagnostics || [https://code.metoffice.gov.uk/trac/um/ticket/5839 UM:#5839] || '''Luke Abraham''' || pre-UMvn10.0. The indexing/values of diagnostics m01s50i101-i104 are incorrect. Fixes provided for vn11.1 and vn11.7. May affect CMIP6 diagnostics <br/> May be best to lump #101. ||
+
| 128 || Bug in UKCA stratospheric chemistry diagnostics || [https://code.metoffice.gov.uk/trac/um/ticket/5839 UM:#5839] || '''Luke Abraham''' || pre-UMvn10.0. The indexing/values of diagnostics m01s50i101-i104 are incorrect. Fixes provided for vn11.1 and vn11.7. May affect CMIP6 diagnostics <br/> May be best to lump #101. || '''ACTION:''' NLA to contact JM
 
|-
 
|-
| 129 || Warning messages in ukca_radaer_lut_in || [https://code.metoffice.gov.uk/trac/um/ticket/5918 UM:#5918] || maybe ''Alan J Hewitt'' || All versions. Code does not crash or clean fail <br/> insetad runs until wallclock runs out <br/> Fix is obvious - change negative numbers to positive. AJH to take ticket. ||
+
| 129 || Warning messages in ukca_radaer_lut_in || [https://code.metoffice.gov.uk/trac/um/ticket/5918 UM:#5918] || maybe ''Alan J Hewitt'' || All versions. Code does not crash or clean fail <br/> insetad runs until wallclock runs out <br/> Fix is obvious - change negative numbers to positive. AJH to take ticket. || '''ACTION:''' AJH to take on, as has to change routine anyway for LFRic port
 
|-
 
|-
| 130 || Bug in aerosol dry deposition when using 27 surface types in JULES || [https://code.metoffice.gov.uk/trac/um/ticket/6088 UM:#6088] <br/> Partially fixed using [https://code.metoffice.gov.uk/trac/um/ticket/5622 UM:#5622] || || The bug exists because of an erroneous dependency on the array size NTYPE (from JULES_SURFACE_TYPES_MOD) in subroutines UKCA_DDEPAER and UKCA_DDEPAER_INCL_SEDI. This is not appropriate because most of the processing is not written to be dependent on the surface types being used in JULES. A surface type at each location is instead inferred (in UKCA_AERO_CTL) from the roughness length and its index is held in the array ILSCAT. The index values are intended to be interpreted with reference to the JULES 9 type scheme. Only the values 1, 3, 7 and 9 are used, corresponding to forest, grassland, water and ice respectively. The indices are used to access arrays YR, CR and ALPHA that are set up in these aerosol dry deposition routines. The arrays should therefore always be of size 9 with values based on the 9 type scheme, irrespective of the JULES NTYPE value. However, alternative, incompatible arrays are set up if NTYPE is 13, 17 or 27. These were presumably intended to be accessed using the type indices consistent with the other JULES schemes but are actually accessed with the 9-type scheme indices available in ILSCAT. Inappropriate values will therefore be obtained when NTYPE is not 9.<br/>Note that Ticket [https://code.metoffice.gov.uk/trac/um/ticket/5622 UM:#5622] will fix the bug when interactive dry deposition is not used in the chemistry or when NTYPE in JULES is 13 or 17 but will not fix it when interactive dry deposition is selected (L_UKCA_INTDD = .TRUE.) and NTYPE is 27. Fixing it for NTYPE = 27 will change results so will require a separate bug fix ticket with appropriate testing and approval. <br/> Fix is simple (~1-line) but testing will take time. Does affect UKESM1 - anything that doesn’t have 9 surface types. CH to pass on to JM. || Ticket opened
+
| 130 || Bug in aerosol dry deposition when using 27 surface types in JULES || [https://code.metoffice.gov.uk/trac/um/ticket/6088 UM:#6088] <br/> Partially fixed using [https://code.metoffice.gov.uk/trac/um/ticket/5622 UM:#5622] || || The bug exists because of an erroneous dependency on the array size NTYPE (from JULES_SURFACE_TYPES_MOD) in subroutines UKCA_DDEPAER and UKCA_DDEPAER_INCL_SEDI. This is not appropriate because most of the processing is not written to be dependent on the surface types being used in JULES. A surface type at each location is instead inferred (in UKCA_AERO_CTL) from the roughness length and its index is held in the array ILSCAT. The index values are intended to be interpreted with reference to the JULES 9 type scheme. Only the values 1, 3, 7 and 9 are used, corresponding to forest, grassland, water and ice respectively. The indices are used to access arrays YR, CR and ALPHA that are set up in these aerosol dry deposition routines. The arrays should therefore always be of size 9 with values based on the 9 type scheme, irrespective of the JULES NTYPE value. However, alternative, incompatible arrays are set up if NTYPE is 13, 17 or 27. These were presumably intended to be accessed using the type indices consistent with the other JULES schemes but are actually accessed with the 9-type scheme indices available in ILSCAT. Inappropriate values will therefore be obtained when NTYPE is not 9.<br/>Note that Ticket [https://code.metoffice.gov.uk/trac/um/ticket/5622 UM:#5622] will fix the bug when interactive dry deposition is not used in the chemistry or when NTYPE in JULES is 13 or 17 but will not fix it when interactive dry deposition is selected (L_UKCA_INTDD = .TRUE.) and NTYPE is 27. Fixing it for NTYPE = 27 will change results so will require a separate bug fix ticket with appropriate testing and approval. <br/> Fix is simple (~1-line) but testing will take time. Does affect UKESM1 - anything that doesn’t have 9 surface types. CH to pass on to JM. || Ticket opened. MD to take ownership
 
|-
 
|-
| 131 || Invalid surface roughness input to aerosol dry deposition over land || [https://code.metoffice.gov.uk/trac/um/ticket/6088 UM:#6088] || || In the UM, UKCA uses the roughness length with stash code 00026 to infer the surface type for aerosol dry deposition (and for the old non-interactive gas dry deposition scheme). However, this value is only valid over the sea. It seems to be set to 0.5 over the land from the UM data I’ve looked at. This seems to be simply a filler value with no scientific significance. As a consequence of the 0.5 value, the UKCA aerosol dry deposition routines categorise all land as forest in the UM runs (routine ukca_aero_ctl uses z0>0.1m for forest). This will interact with bug #130 in aerosol dry deposition (see above) that occurs when using any number of surface types in JULES other than 9.<br/> In LFRic JH is using the tile values. Not sure how easy this would be to do in the UM. Could be out of scope for this group - potentially ask Adrian Lock or Ian Boutle. NLA to email. || Found e-mail from Ian/Adrian (Feb:2016) suggesting <b>3-028</b> instead. Ticket opened
+
| 131 || Invalid surface roughness input to aerosol dry deposition over land || [https://code.metoffice.gov.uk/trac/um/ticket/6088 UM:#6088] || || In the UM, UKCA uses the roughness length with stash code 00026 to infer the surface type for aerosol dry deposition (and for the old non-interactive gas dry deposition scheme). However, this value is only valid over the sea. It seems to be set to 0.5 over the land from the UM data I’ve looked at. This seems to be simply a filler value with no scientific significance. As a consequence of the 0.5 value, the UKCA aerosol dry deposition routines categorise all land as forest in the UM runs (routine ukca_aero_ctl uses z0>0.1m for forest). This will interact with bug #130 in aerosol dry deposition (see above) that occurs when using any number of surface types in JULES other than 9.<br/> In LFRic JH is using the tile values. Not sure how easy this would be to do in the UM. Could be out of scope for this group - potentially ask Adrian Lock or Ian Boutle. NLA to email. || Found e-mail from Ian/Adrian (Feb:2016) suggesting <b>3-028</b> instead. Ticket opened. MD to take ownership.
 
|-
 
|-
 
|}
 
|}
Line 103: Line 129:
 
'''2D photolysis''' <br/>
 
'''2D photolysis''' <br/>
 
At the CMG, we previously agreed to retain the 2D photolysis on the trunk, but a number of issues have been encountered while working on the relevant LFRic/API ticket. This code does not work from the trunk due to missing input files for StratTrop, there is no a rose-stem test for it, and there is currently no way to run the Cambridge 2D model to generate new files when required (e.g., StratTrop, CRI etc. ).
 
At the CMG, we previously agreed to retain the 2D photolysis on the trunk, but a number of issues have been encountered while working on the relevant LFRic/API ticket. This code does not work from the trunk due to missing input files for StratTrop, there is no a rose-stem test for it, and there is currently no way to run the Cambridge 2D model to generate new files when required (e.g., StratTrop, CRI etc. ).
  +
  +
'''ACTION:''' NLA to make new table for code not tested listing tickets for rose-stem tests that need to be added.
   
 
{| class="wikitable" border = "1px"
 
{| class="wikitable" border = "1px"
Line 154: Line 182:
   
 
Please see the document [[Media:UKCA_API_design_proposal_v5.pdf|UKCA_API_design_proposal_v5.pdf]] for the latest API design.
 
Please see the document [[Media:UKCA_API_design_proposal_v5.pdf|UKCA_API_design_proposal_v5.pdf]] for the latest API design.
  +
  +
Work progressing. When making changes around API, please refer to appendix as to which routines are UM and which are UKCA to ensure to keep the namespaces separate
   
 
=== Progress with Priorities (LA) ===
 
=== Progress with Priorities (LA) ===
Line 168: Line 198:
 
!style="text-align:top;rowspan:2";|Status
 
!style="text-align:top;rowspan:2";|Status
 
|-
 
|-
|1 || UKCA API <br/> RADAER API || John Hemmings <br/> Alan Hewitt|| No || UKCA API work ??? (AJH) <br/> Radaer API on hold until after GA7 port to LFRic. <br/> Functionality of RADAER in LFRic will work without an API although it will be preferable to update this in future.
+
|1 || UKCA API || John Hemmings (main) || No || UKCA API work is progressing (AJH). Radaer API on hold until after GA7 port to LFRic. Functionality of RADAER in LFRic will work without an API although it will be preferable to update this in future.
 
|-
 
|-
 
|2 || Review UKCA tests to cover all requirements || Luke Abraham / Mohit Dalvi || ||
 
|2 || Review UKCA tests to cover all requirements || Luke Abraham / Mohit Dalvi || ||
Line 182: Line 212:
 
|7 || Non-API LFRic work, e.g. Porting science functionality etc. || Alan J Hewitt|| No || Porting calculation of CDNC from GLOMAP Climatology aerosols complete. <br/> I will pass required elements of ukca_radaer to ukca_radaer_band_average (um:#5957) <br/> Porting calculation of fields in radaer_band_average to be passed to Socrates underway(lfric:#2488)
 
|7 || Non-API LFRic work, e.g. Porting science functionality etc. || Alan J Hewitt|| No || Porting calculation of CDNC from GLOMAP Climatology aerosols complete. <br/> I will pass required elements of ukca_radaer to ukca_radaer_band_average (um:#5957) <br/> Porting calculation of fields in radaer_band_average to be passed to Socrates underway(lfric:#2488)
 
|-
 
|-
  +
|8 || RADAER API || Alan Hewitt (main) || No || Radaer API on hold until after GA7 port to LFRic. <br/> Functionality of RADAER in LFRic will work without an API although it will be preferable to update this in future. <br/> Not clear if RADAER will work independently of UM in single column mode. <br/> AJH and AH and JH and Ben Johnson and NB need to work out if desirable and practical to run independent of UM.
|8 || RADAER optimisation || || NO ||
 
 
|-
 
|-
 
|9 || RADAER optimisation || || NO ||
|9 || Dry deposition and Jules tiles || || YES || If Jules adds extra tiles for UKESM2 we may need to hard code options in dry deposition (like in um:#1761)
 
 
|-
 
|-
 
|10 || Dry deposition and Jules tiles || || YES || If Jules adds extra tiles for UKESM2 we may need to hard code options in dry deposition (like in um:#1761)
|10 || FastJX-GLOMAP coupling || || YES || UMvn10.8 branches exist - see ticket [https://code.metoffice.gov.uk/trac/um/ticket/2689 UM:#2689]<br/>'''Note:''' FastJX rates also need updating - potential for code as well as input-file changes
 
 
|-
 
|-
 
|11 || FastJX-GLOMAP coupling || || YES || UMvn10.8 branches exist - see ticket [https://code.metoffice.gov.uk/trac/um/ticket/2689 UM:#2689]<br/>'''Note:''' FastJX rates also need updating - potential for code as well as input-file changes
|11 || Cloud-J || || ||
 
 
|-
 
|-
 
|12 || Cloud-J || || ||
|12 || Fixes for chemistry rates and ASAD (bugs #101 & #103) || Luke Abraham || YES || #101 still open, #103 completed (necessary for GC5 ticket [https://code.metoffice.gov.uk/trac/gmed/ticket/551 GMED:#551])
 
 
|-
 
|-
|13 || Rc fixes for water (bug #104) || UKESM Core Team || YES || Lodged at UMvn11.7 in ticket [https://code.metoffice.gov.uk/trac/um/ticket/5167 UM:#5167]
+
|13 || Fixes for chemistry rates and ASAD (bugs #101 & #103) || Luke Abraham || YES || #101 still open, #103 completed (necessary for GC5 ticket [https://code.metoffice.gov.uk/trac/gmed/ticket/551 GMED:#551])
 
|-
 
|-
|14 || CH4 deposition fixes (bug #109) || Gerd Folberth || YES ||
+
|14 || Rc fixes for water (bug #104) || UKESM Core Team || YES || Lodged at UMvn11.7 in ticket [https://code.metoffice.gov.uk/trac/um/ticket/5167 UM:#5167]
 
|-
 
|-
  +
|15 || CH4 deposition fixes (bug #109) || Gerd Folberth || YES ||
|15 || UKCA STASHmaster PP-codes || Luke Abraham || || Verification system makes some use of existing PP-codes. '''New items should have a PP-code of 0''' and verification team will use STASH items for these if required.
 
 
|-
 
|-
 
|16 || UKCA STASHmaster PP-codes || Luke Abraham || || Verification system makes some use of existing PP-codes. '''New items should have a PP-code of 0''' and verification team will use STASH items for these if required.
|16 || Removal of redundant code || ALL || No || Parked whilst GA7.0 is a protected suite.
 
 
|-
 
|-
|17 || GLOMAP-CLIM API refresh || Alan J Hewitt || No || Parked until science functionality around GLOMAP aerosols ported to LFRic.
+
|17 || Removal of redundant code || ALL || No || Parked whilst GA7.0 is a protected suite.
 
|-
 
|-
  +
|18 || GLOMAP-CLIM API refresh || Alan J Hewitt || No || Parked until science functionality around GLOMAP aerosols ported to LFRic.
|18 || N48L85 configuration || || ||
 
 
|-
 
|-
 
|19 || N48L85 configuration || || ||
|19 || ACTIVATE optimisation || TBC || No || A quick win here is to reduce nwbins in namelist ( see um:#4740 ). <br/> Parked for now.
 
 
|-
 
|-
 
|20 || ACTIVATE optimisation || TBC || No || A quick win here is to reduce nwbins in namelist ( see um:#4740 ). <br/> Parked for now.
|20 || Stratospheric Ozone improvements || James Keeble/Luke Abraham || YES || Work ongoing, covered in ticket [https://code.metoffice.gov.uk/trac/um/ticket/5641 UM:#5641]. <br/>'''Note:''' FastJX rates also need updating - potential for code as well as input-file changes
 
 
|-
 
|-
|21 || Solar cycle in photolysis || Luke Abraham || YES || Some code lodged at UMvn10.9 ([https://code.metoffice.gov.uk/trac/um/ticket/2587 UM:#2587]) but needs bugfixing. This work has stalled in ticket [https://code.metoffice.gov.uk/trac/um/ticket/4828 UM:#4828] (bug #110).
+
|21 || Stratospheric Ozone improvements || James Keeble/Luke Abraham || YES || Work ongoing, covered in ticket [https://code.metoffice.gov.uk/trac/um/ticket/5641 UM:#5641]. <br/>'''Note:''' FastJX rates also need updating - potential for code as well as input-file changes
 
|-
 
|-
|22 || Deposition updates from CSIRO || || YES || Code lodged in [https://code.metoffice.gov.uk/trac/um/ticket/4020 UM:#4020] (UMvn11.4, oceanic dry deposition) and [https://code.metoffice.gov.uk/trac/um/ticket/5713 UM:#5713] (UMvn11.8, Lightning NOx updates).
+
|22 || Solar cycle in photolysis || Luke Abraham || YES || Some code lodged at UMvn10.9 ([https://code.metoffice.gov.uk/trac/um/ticket/2587 UM:#2587]) but needs bugfixing. This work has stalled in ticket [https://code.metoffice.gov.uk/trac/um/ticket/4828 UM:#4828] (bug #110).
  +
|-
  +
|23 || Deposition updates from CSIRO || || YES || Code lodged in [https://code.metoffice.gov.uk/trac/um/ticket/4020 UM:#4020] (UMvn11.4, oceanic dry deposition) and [https://code.metoffice.gov.uk/trac/um/ticket/5713 UM:#5713] (UMvn11.8, Lightning NOx updates).
 
|-
 
|-
 
|}
 
|}
   
=== UM11.8 Tickets ===
+
=== UM11.9 Tickets ===
   
 
See '''[https://code.metoffice.gov.uk/trac/um/query?status=approved&status=assigned&status=closed&status=code_review&status=committed&status=in_progress&status=new&status=sci%2Ftech_review&keywords=~UKCA&milestone=UM11.9+(Feb-21)&group=owner&col=id&col=summary&col=milestone&col=status&col=type&col=component&col=reporter&order=priority here]''' for UM vn11.9 tickets on MOSRS.
 
See '''[https://code.metoffice.gov.uk/trac/um/query?status=approved&status=assigned&status=closed&status=code_review&status=committed&status=in_progress&status=new&status=sci%2Ftech_review&keywords=~UKCA&milestone=UM11.9+(Feb-21)&group=owner&col=id&col=summary&col=milestone&col=status&col=type&col=component&col=reporter&order=priority here]''' for UM vn11.9 tickets on MOSRS.
Line 231: Line 263:
 
|| NLA || ARCHER2 eCSE project to work on UKCA flight-track simulator, to begin in June 2021
 
|| NLA || ARCHER2 eCSE project to work on UKCA flight-track simulator, to begin in June 2021
 
|-
 
|-
  +
|| MR || involved with NGMS as external collab. - talking about training. Models not quite ready yet. May make someone in their team who would be a LFRic
 
|}
 
|}
  +
  +
LFRic port taking shape - might have exciting results for next time
  +
  +
'''ACTION:''' MR to contact Leighton Regayre regarding flight-track work. Duncan Watson-Paris might have something too.
   
 
=== AOB/DNM (LA) ===
 
=== AOB/DNM (LA) ===
   
 
AJH - SUSSBCOCDU7mode is being ported to LFRic. There is currently no rose stem test for i_mode_setup==8. There is a parked branch (see um:#6032). Would someone be able to take over?
 
AJH - SUSSBCOCDU7mode is being ported to LFRic. There is currently no rose stem test for i_mode_setup==8. There is a parked branch (see um:#6032). Would someone be able to take over?
  +
* this is with dust, might not happen this release. Get in touch with AJH if interested
  +
  +
AL asked about the UKCA evaluation suite and whether there was a mechanism to add new datasets. NLA suggested contacting MD.
  +
CH asked about ESMValTool use. There is a summer student coming to look at this. People should contact CH if they want to discuss this further.
   
 
=== Date of next meeting (LA) ===
 
=== Date of next meeting (LA) ===
  +
  +
'''ACTION:''' NLA to send round Doodle Poll for end of April.

Latest revision as of 18:12, 10 March 2021

Code management group minutes

Teleconference Details

Friday 26th February 2021, 10.00am - 11.30am GMT

Meeting via Zoom - details have been emailed

Met Office: AJH, NC, CH, FM, JH, MG, AH, MD

Cambridge: NLA, SAN

Leeds: MR, DG, GM

Reading: NB

NIWA: OM

CSIRO: AL

Apologies: FOC, MS

Actions from this meeting

  1. (ongoing) LA to put C_SPECIES definitions in the Redundant Code table (short-term), and switch to use M_SPECIES instead. Talk with JH about AQUM tests and requirements. Note that there will be problems with exoplanets and >100km top configs where M_air not constant. LA to make a branch and progress.
  2. (ongoing) Monsoon users MASS data Management. Points-of-contact identified and list of UMUI jobs created up to Dec-2014 circulated to most centres for review.
  3. (ongoing) GM (supported by KP/MY/AH) has made a table on UKCA wiki documenting GLOMAP versions. ALL to read, GM & others to update table.
  4. (ongoing) JH to update API document to reflect the UMvn11.9 release
  5. (new) AJH to investigate which UKCA (and GLOMAP_CLIM) options not protected under rose-stem.
  6. (new) NLA to chat with OM offline regarding Solar Cycle routine
  7. (new) NLA to contact JM regarding bug #128 (Bug in UKCA stratospheric chemistry diagnostics)
  8. (new) AJH to take on bug #129 (warning messages in ukca_radaer_lut_in) as has to change routine anyway for LFRic port
  9. (new) NLA to make new table for code not tested listing tickets for rose-stem tests that need to be added.
  10. (new) MR to contact Leighton Regayre regarding flight-track work. Duncan Watson-Paris might have something too.
  11. (new) NLA to send round Doodle Poll for end of April.

Minutes

Actions from the Last Meeting (LA)

  1. (ongoing) LA to put C_SPECIES definitions in the Redundant Code table (short-term), and switch to use M_SPECIES instead. Talk with JH about AQUM tests and requirements. Note that there will be problems with exoplanets and >100km top configs where M_air not constant. LA to make a branch and progress for vn11.6.
    • Ongoing
  2. (ongoing) Monsoon users MASS data Management
    • Status: Points-of-contact identified and list of UMUI jobs created up to Dec-2014 circulated to most centres for review.
    • Leave open until first round completed
  3. (ongoing) GM (supported by KP/MY/AH) has made a table on UKCA wiki documenting GLOMAP versions. ALL to read, GM & others to update table.
    • GM has a ticket to take some code back.
    • There is also a GLOMAP Dust ticket, necessary for UKCA consolidation away from CLASSIC, as only UKCA will be ported to LFRic.
    • Leave open
  4. (ongoing) NLA to make a ticket to add N48 Linux and update EXP test
    • Closed
  5. (ongoing) NLA to contact AJH/GM offline regarding coupling StratTrop to GLOMAP-CLIM
    • Closed. Might align with work of GM/SD
  6. (ongoing) NLA to contact GF about bug #109 (Bug in dry deposition of CH4 for 13/17/27 tiles)
    • Closed
  7. (new) NLA to remove Old (non-interactive) Dry deposition scheme from the Redundant Code table
    • Closed
  8. (ongoing) JH, NC, LA, FOC, OM (and possibly others) to discuss the need for data from 2-D Cambridge model as well as other top-boundary options for tropospheric configurations. NLA to check with FOC & OM
    • FastJX rates have been updated as part of StratO3 work. FJX formatting differences to get in the UM. Cloud-J is also available to be incorporated if desired.
    • No-one can run the 2D model any more. 2D model not working “off the shelf”. API work can still progress. NLA to open ticket for rose-stem test, NC to progress API ticket.
    • Closed
  9. (new) AJH to take ticket UM:#5918 (bug #129, "Warning messages in ukca_radaer_lut_in")
    • Closed
  10. (new) JH to update API document to reflect the UMvn11.8 release
    • Ongoing - do for UMvn11.9 release
  11. (new) NLA to email Adrian Lock or Ian Boutle regarding Bug #131 ("Invalid surface roughness input to aerosol dry deposition over land")
    • MD has opened a ticket and will progress with suggested replacement STASH code. Should cc GM
    • Closed
  12. (new) AJH to re-write descriptions of Priorities #1 & #7.
    • Ongoing
  13. (new) NLA to put Dry Deposition down as a high(ish) priority.
    • Closed
  14. (new) NLA to send round Doodle poll for February 2021.
    • Closed

Standing actions

  1. (ongoing - standing item) CMG to monitor list of bugs and circulate between group for owners.
  2. (ongoing - standing item) At CMG future meetings there should be included an appendix listing the open bugs. If a ticket is included it is not an open bug (as the owner of ticket is person doing lodging).
  3. (ongoing - standing item) ALL with access to keep monitoring ukca_bugs email list.
  4. (ongoing - standing item) ALL to think about if code changes will change KGO and let systems team know in good time, and remember to include the UKCA keywords to all UKCA tickets. This should be a standard part of our working practice. Note also the required keywords.
  5. (ongoing - standing item) ALL to note, review, and remove obsolete/redundant code
  6. (ongoing - standing item) ALL closed ticket owners to produce a summary of their change for the UKCA newsletter for special occasions, e.g. to coincide with Composition-Climate Meeting.
  7. (ongoing - standing item) Code Owner to produce draft newsletter for CMG to approve.
  8. (ongoing - standing item) ALL to consider other rose-stem tests that could be included
  9. (ongoing - standing item) ALL to email LA with suggestions for next set of tutorials

Bugs/Bugfixes (LA)

Open Bugs

# Description Ticket Owner Comments Comments from this meeting
35 Error in labelling: Surface resistance <--> stomatal resistance ? UM:#1409 Fiona O'Connor Leave open. Garry Hayman started work in offline JULES.
Still ongoing. JM found bug in SO2 deposition, where there is an inconsistency when changing tiles. Making progress.
Leave open. GH gave update, has done a lot of work. Concerned it might not be bit-reproducable, but could be solvable. Encouraging to lodge existing. Resistances done as metadata. Not clear as to timescales.
FOC to encourage Garry Hayman to start lodging JULES code piecemeal.
LA to email GH, cc JM
JM to email GH
GH adding improvements via UM:#5751
101 Errors in reaction rates and diagnostics UM:#4466 Luke Abraham / Scott Archer-Nicolls There is a need to conserve science config for UKESM1, so changes need to be on a flag.
Colin has been looking at DMSO, as this is not currently used in StratTrop but is in Offline.
Might be able to merge the rate with CEJ changes, but best to leave the diagnostic issues as a separate change.
LA, JM, CEJ, SAN to discuss offline and keep GM in loop.
Use versioning system. Talk about further offline.
Keep ongoing.
LA to do with #103
Do for vn11.6. Quite a large ticket.
Hope to progress for vn11.6
Bump for vn11.7
LA may be able to progress. Versioning has been done separately. Another issue was added to this recently, to do with formation of H2O - may have an impact
Some CRI fixes needed too. May not be able to progress for vn11.7
Some of the fixes have been incorporated in UM:#5057
#5057 didn’t make vn11.8
109 Bug in dry deposition of CH4 for 13/17/27 tiles UM:#4913 Gerd Folberth To be Lodged after 10.6
Gerd noted unusual CH4 output in CMIP6 runs.
May need a rose stem test for H2 and CH4 drdydep code lodged at UM:#4157
Makes a huge difference to CH4. Needs testing. AJH or GF will do during vn11.4, progress for vn11.6. May need UKESM1 approval.
Code is difficult to understand. AJH thinks GarryH is aware of this problem.
LA to ask GF to add more details
GF has emailed. LA to update wiki pages (see below)
Only impacts emission driven runs.
LA to check with Gerd about this issue
NLA to chase GF
110 UKCA solar-cycle routine does not pass NRUN-CRUN test UM:#4828 Luke Abraham To be Lodged after 11.5
Have a solution.
Solution is a bit tricky to check the logic correctly.
Currently testing. May not make vn11.7.
Will not make UMvn11.7 - need to analyse runs to understand what is going on
NLA to investigate further
ACTION: NLA to chat with OM offline
119 Incorrect calculation for gridbox area - only affects GLOMAP-mode diagnostics um:#5506 Calculation of volume appears correct, but area is not. This calculation is missing the factor fv_cos_theta_latitude so will not cause area to tend towards zero at the poles. It also seems to use an unnecessary approximation to the latitude difference (based on sinv_latitude) which may break down at high latitudes. The calculation should perhaps be consistent with subsequent volume calculation but without the delta_r factor. This will likely only affect diagnostics calculated in ukca_emiss_diags_mode, where it is used to convert from kg/m2/s to mol/gridbox/s, although it is also printed out in ukca_aero_ctl.
JH spotted. Just diagnostic affected.
LA to open a ticket. cc JM, NC
LA to update with MOSRS ticket
No owner yet
Needs testing.
GM will have a look, but can’t take it on
124 H2 and N2 cannot be set for RCP and WMOA1 scenario routines UM:#5620 Mohit Dalvi Values are hard-wired in the code and cannot be changed without a branch
Will be handled at UM11.8
At least for the next version
128 Bug in UKCA stratospheric chemistry diagnostics UM:#5839 Luke Abraham pre-UMvn10.0. The indexing/values of diagnostics m01s50i101-i104 are incorrect. Fixes provided for vn11.1 and vn11.7. May affect CMIP6 diagnostics
May be best to lump #101.
ACTION: NLA to contact JM
129 Warning messages in ukca_radaer_lut_in UM:#5918 maybe Alan J Hewitt All versions. Code does not crash or clean fail
insetad runs until wallclock runs out
Fix is obvious - change negative numbers to positive. AJH to take ticket.
ACTION: AJH to take on, as has to change routine anyway for LFRic port
130 Bug in aerosol dry deposition when using 27 surface types in JULES UM:#6088
Partially fixed using UM:#5622
The bug exists because of an erroneous dependency on the array size NTYPE (from JULES_SURFACE_TYPES_MOD) in subroutines UKCA_DDEPAER and UKCA_DDEPAER_INCL_SEDI. This is not appropriate because most of the processing is not written to be dependent on the surface types being used in JULES. A surface type at each location is instead inferred (in UKCA_AERO_CTL) from the roughness length and its index is held in the array ILSCAT. The index values are intended to be interpreted with reference to the JULES 9 type scheme. Only the values 1, 3, 7 and 9 are used, corresponding to forest, grassland, water and ice respectively. The indices are used to access arrays YR, CR and ALPHA that are set up in these aerosol dry deposition routines. The arrays should therefore always be of size 9 with values based on the 9 type scheme, irrespective of the JULES NTYPE value. However, alternative, incompatible arrays are set up if NTYPE is 13, 17 or 27. These were presumably intended to be accessed using the type indices consistent with the other JULES schemes but are actually accessed with the 9-type scheme indices available in ILSCAT. Inappropriate values will therefore be obtained when NTYPE is not 9.
Note that Ticket UM:#5622 will fix the bug when interactive dry deposition is not used in the chemistry or when NTYPE in JULES is 13 or 17 but will not fix it when interactive dry deposition is selected (L_UKCA_INTDD = .TRUE.) and NTYPE is 27. Fixing it for NTYPE = 27 will change results so will require a separate bug fix ticket with appropriate testing and approval.
Fix is simple (~1-line) but testing will take time. Does affect UKESM1 - anything that doesn’t have 9 surface types. CH to pass on to JM.
Ticket opened. MD to take ownership
131 Invalid surface roughness input to aerosol dry deposition over land UM:#6088 In the UM, UKCA uses the roughness length with stash code 00026 to infer the surface type for aerosol dry deposition (and for the old non-interactive gas dry deposition scheme). However, this value is only valid over the sea. It seems to be set to 0.5 over the land from the UM data I’ve looked at. This seems to be simply a filler value with no scientific significance. As a consequence of the 0.5 value, the UKCA aerosol dry deposition routines categorise all land as forest in the UM runs (routine ukca_aero_ctl uses z0>0.1m for forest). This will interact with bug #130 in aerosol dry deposition (see above) that occurs when using any number of surface types in JULES other than 9.
In LFRic JH is using the tile values. Not sure how easy this would be to do in the UM. Could be out of scope for this group - potentially ask Adrian Lock or Ian Boutle. NLA to email.
Found e-mail from Ian/Adrian (Feb:2016) suggesting 3-028 instead. Ticket opened. MD to take ownership.

Redundant Code (LA)

Code for deletion

PLEASE REMEMBER TO EDIT THE ORIGINAL REDUNDANT CODE TABLE AND NOT THIS PAGE

  • The NG-Composition Project Board has agreed to use the Redundant code table as the Technical Debt Log for UKCA as part of that project. This has highlighted the issue that some areas of code are not listed as being redundant, but are also not tested/used routinely and are not in any rose-stem tests, for example 2D photolysis and the TropIsop and Strat chemistry schemes. We have been asked to review this code and list untested code which is still desirable to be included for testing, and to ensure that other areas of code are listed for deletion.

2D photolysis
At the CMG, we previously agreed to retain the 2D photolysis on the trunk, but a number of issues have been encountered while working on the relevant LFRic/API ticket. This code does not work from the trunk due to missing input files for StratTrop, there is no a rose-stem test for it, and there is currently no way to run the Cambridge 2D model to generate new files when required (e.g., StratTrop, CRI etc. ).

ACTION: NLA to make new table for code not tested listing tickets for rose-stem tests that need to be added.

# Description Ticket Remarks Status Timeframe Owner Comments from previous meetings Comments from this meeting
4 ukca_strat_update.F90 - relax_ozone UM:#1505 None PROPOSED Medium-term Luke Abraham
5 Backward Euler Standard Tropospheric Chemistry UM:#1507 None PROPOSED Medium-term Fiona O'Connor
6 Wet oxidation of SO2 in GLOMAP UM:#4475 None PROPOSED Medium-term Colin Johnson JM to look at this re: UKESM1 c.f. offline GLOMAP. JM to take ownership.
Still needed for CTM. Relevance for standalone code and later coupling to CTM.
7 Updraft velocity - l_conv_tke UM:#3668 Proposed in December 2017. Approval being sought for GA series (likely GA8). PROPOSED Medium-term Alan J Hewitt / Ian Boutle
8 All backward Euler chemistry schemes None Note that this is only for the “hard-coded” BE schemes. Quite a lot of work would be involved, but good as a longer-term aim. Note that problems for AQUM would need to be addressed first. PROPOSED Long-term Luke Abraham
9 Deprecated UKCA netcdf attribute options UM:#2513 'emission_type', string type attributes no longer recommeneded. Need some time for most new code to adopt these. Still used in AQUM files. DEPRECATED Medium-term Nick Savage AQUM are addressing the files. Have gone from operational jobs, have ticket to remove from rose-stem. LN to document. These have been removed from AQUM.
AQUM work has been done.
From AS: In the ancil ticket linked from #2513 (https://code.metoffice.gov.uk/trac/ancil/ticket/782) it says that GA7 depends on the old format files, and as far as I know this is still true. In the 3-step timeline suggested, we haven't reached step 2 unfortunately. That ticket was about ensuring GA8 did not use the old attributes. I believe that GA8 is due for release in the next few months (it has been a very long time coming), so UM vn11.5 may be the last version at which GA7 is supported. Do you mind waiting a bit longer?
AJH to follow-up with LA
10 ASAD families chemistry None Families chemistry has not been used for many years (since at least UM6.1. It is likely that it no longer works if turned on, and it complicates the code making other developments harder DEPRECATED Short-term Luke Abraham
11 Dry deposition 9 PFT option None The 13 PFT option has been adopted for UKESM1.
The 9 PFT option is possibly not being used at all.
Proposed in June 2018.
PROPOSED Long-term Alan J Hewitt
12 Remove explicit C_SPECIES constants and calculate these from M_SPECIES and the mass of air None Will have wide-ranging rose-stem KGO breakages PROPOSED Short-term Luke Abraham
13 Remove temporary logical l_fix_nacl_density
Introduced at UM:#2405
UM:#3490 Requires AMIP testing and a GMED ticket
Could be accepted to GA9
PROPOSED Medium-term Jane Mulcahy See JM GMED action
15 Remove temporary logical l_fix_ukca_impscav
Introduced at UM:#1421
UM:#4145 Approval being sought for GA series (likely GA9)
GMED:#402
PROPOSED Medium-term Alan J Hewitt See JM GMED action
16 Remove temporary logical l_fix_improve_drydep
Introduced at UM:#1250
UM:#3997 Approval being sought for GA series (likely GA9)
GMED:#393
PROPOSED Medium-term Alan J Hewitt See JM GMED action
17 Remove temporary logical l_fix_ukca_h2dd_x
Introduced at UM:#4157
UM:#4245 Approval being sought for GA series (likely GA9)
GMED:#410
PROPOSED Medium-term Alan J Hewitt See JM GMED action
18 Remove temporary logical l_fix_neg_pvol_wat
Introduced at UM:#4383
UM:#4416 Approval being sought for GA series (likely GA9)
GMED:#421
PROPOSED Medium-term Alan J Hewitt
21 Remove code behind L_use_stratclim from ukca_fastjx_mod
Introduced prior to MOSRS
UM:#4854 This could either be properly included via a namelist or removed from the UM PROPOSED Medium-term Alan J Hewitt LA contact OW about progressing FastJX-RADAER work
Ties in with API work. MD/NC to take a look, can be removed. Do as part of API.
Relevant person take ownership as part of API work
NC to take ownership as part of his work
22 Remove temporary logical l_fix_ukca_input_meoh_emiss
Introduced at UM:#3031
UM:#4848 Approval being sought for GA series (likely GA9)
GMED:#461
PROPOSED Medium-term Mohit Dalvi
24 Remove ability to use of Cambridge 2D model data from ukca_stratf.F90 PROPOSED Neal Carr Need to confirm from wider community for possible tropospheric configs and other choices for top-bdy

Update on UKCA API redesign

Please see the document UKCA_API_design_proposal_v5.pdf for the latest API design.

Work progressing. When making changes around API, please refer to appendix as to which routines are UM and which are UKCA to ensure to keep the namespaces separate

Progress with Priorities (LA)

ACTION REQUEST FROM UKCA SCIENCE & MANAGEMENT BOARD: CMG to provide list of priorities & their status, with particular thought to UKESM2 changes that will be required.

The current priorities are:

# Description Owner Desirable for UKESM2? Status
1 UKCA API John Hemmings (main) No UKCA API work is progressing (AJH). Radaer API on hold until after GA7 port to LFRic. Functionality of RADAER in LFRic will work without an API although it will be preferable to update this in future.
2 Review UKCA tests to cover all requirements Luke Abraham / Mohit Dalvi
3 Updates/fixes to GLOMAP routines YES
4 Standalone UKCA configurations Luke Abraham/Scott Archer-Nicholls ExCALIBUR work progressing, currently working on build system.
5 Emissions flexibility Mohit Dalvi
6 Separare UKCA repository Luke Abraham Separate UKCA trac environment set-up on MOSRS here, will hold UKCA code on completion of current ExCALIBUR project.
7 Non-API LFRic work, e.g. Porting science functionality etc. Alan J Hewitt No Porting calculation of CDNC from GLOMAP Climatology aerosols complete.
I will pass required elements of ukca_radaer to ukca_radaer_band_average (um:#5957)
Porting calculation of fields in radaer_band_average to be passed to Socrates underway(lfric:#2488)
8 RADAER API Alan Hewitt (main) No Radaer API on hold until after GA7 port to LFRic.
Functionality of RADAER in LFRic will work without an API although it will be preferable to update this in future.
Not clear if RADAER will work independently of UM in single column mode.
AJH and AH and JH and Ben Johnson and NB need to work out if desirable and practical to run independent of UM.
9 RADAER optimisation NO
10 Dry deposition and Jules tiles YES If Jules adds extra tiles for UKESM2 we may need to hard code options in dry deposition (like in um:#1761)
11 FastJX-GLOMAP coupling YES UMvn10.8 branches exist - see ticket UM:#2689
Note: FastJX rates also need updating - potential for code as well as input-file changes
12 Cloud-J
13 Fixes for chemistry rates and ASAD (bugs #101 & #103) Luke Abraham YES #101 still open, #103 completed (necessary for GC5 ticket GMED:#551)
14 Rc fixes for water (bug #104) UKESM Core Team YES Lodged at UMvn11.7 in ticket UM:#5167
15 CH4 deposition fixes (bug #109) Gerd Folberth YES
16 UKCA STASHmaster PP-codes Luke Abraham Verification system makes some use of existing PP-codes. New items should have a PP-code of 0 and verification team will use STASH items for these if required.
17 Removal of redundant code ALL No Parked whilst GA7.0 is a protected suite.
18 GLOMAP-CLIM API refresh Alan J Hewitt No Parked until science functionality around GLOMAP aerosols ported to LFRic.
19 N48L85 configuration
20 ACTIVATE optimisation TBC No A quick win here is to reduce nwbins in namelist ( see um:#4740 ).
Parked for now.
21 Stratospheric Ozone improvements James Keeble/Luke Abraham YES Work ongoing, covered in ticket UM:#5641.
Note: FastJX rates also need updating - potential for code as well as input-file changes
22 Solar cycle in photolysis Luke Abraham YES Some code lodged at UMvn10.9 (UM:#2587) but needs bugfixing. This work has stalled in ticket UM:#4828 (bug #110).
23 Deposition updates from CSIRO YES Code lodged in UM:#4020 (UMvn11.4, oceanic dry deposition) and UM:#5713 (UMvn11.8, Lightning NOx updates).

UM11.9 Tickets

See here for UM vn11.9 tickets on MOSRS.

See here for UM vn12.0 tickets on MOSRS.

PLEASE REMEMBER TO USE THE UKCA KEYWORD FOR ALL UKCA CHANGES

NOTE: New requirement for LFric testing of all changes under src/atmosphere

Round (virtual) Table of current activities, plans

Person Activity
NLA ARCHER2 eCSE project to work on UKCA flight-track simulator, to begin in June 2021
MR involved with NGMS as external collab. - talking about training. Models not quite ready yet. May make someone in their team who would be a LFRic

LFRic port taking shape - might have exciting results for next time

ACTION: MR to contact Leighton Regayre regarding flight-track work. Duncan Watson-Paris might have something too.

AOB/DNM (LA)

AJH - SUSSBCOCDU7mode is being ported to LFRic. There is currently no rose stem test for i_mode_setup==8. There is a parked branch (see um:#6032). Would someone be able to take over?

  • this is with dust, might not happen this release. Get in touch with AJH if interested

AL asked about the UKCA evaluation suite and whether there was a mechanism to add new datasets. NLA suggested contacting MD. CH asked about ESMValTool use. There is a summer student coming to look at this. People should contact CH if they want to discuss this further.

Date of next meeting (LA)

ACTION: NLA to send round Doodle Poll for end of April.