Minutes of the code management group meeting 2023-11-20
Teleconference Details
Monday 11th September 2023, 10.00am - 11.30am GMT
Meeting via Zoom - details have been emailed
Met Office: AJH, PMJ, CN, MS, JW, JH, MD
Cambridge: NLA
Leeds: DG, MR
NIWA:
Canterbury: CH
CSIRO:
Apologies: OM, AL, GM
Actions from this meeting
- (ongoing) NLA to put
C_SPECIES
definitions in the Redundant Code table (short-term), and switch to useM_SPECIES
instead. Talk with JH about AQUM tests and requirements. Note that there will be problems with exoplanets and >100km top configs where M_air not constant. LA to make a branch and progress. May want to move to redundant code table at some point - (ongoing) GM/DG to update table on UKCA wiki documenting GLOMAP versions. DG/GM to consider the code and lodging process for GLOMAP developments and consider a suitable rose-stem test supported by NLA.
- (ongoing) JH on update API document to UMvn13.4 release. NLA to provide feedback before it is be circulated.
- (new) JH to make example branch for how to add-in diagnostics
- (ongoing) ALL look at um:#6203 showing other unprotected rose-stem options and think about any code/settings they are interested in.
- (ongoing) NLA, AJH to identify owner for TropChem item in the Desirable changes not Tested Table. AJH to arrange call with NLA to discuss this and creation of rose-stem jobs. Should also update the UKCA UMDP to reflect which configurations are supported/widely used.
- (ongoing) PMJ to send NLA the details of the simple column job he has developed for the NAME work
- (new) DG and AJH to chat offline regarding bug #152 (correct bug in water_content_v)
Actions from the Last Meeting (NLA)
Minutes of the code management group meeting 2023-09-11
- (ongoing) NLA to put
C_SPECIES
definitions in the Redundant Code table (short-term), and switch to useM_SPECIES
instead. Talk with JH about AQUM tests and requirements. Note that there will be problems with exoplanets and >100km top configs where M_air not constant. LA to make a branch and progress. May want to move to redundant code table at some point- ongoing
- (ongoing) GM/DG to update table on UKCA wiki documenting GLOMAP versions. DG/GM to consider the code and lodging process for GLOMAP developments and consider a suitable rose-stem test supported by NLA.
- ongoing
- DG to talk with GM
- (ongoing) JH on update API document to UMvn13.4 release. NLA to provide feedback before it is be circulated.
- ongoing
- ACTION: JH to make example branch for how to add-in diagnostics
- (ongoing) ALL look at um:#6203 showing other unprotected rose-stem options and think about any code/settings they are interested in.
- ongoing
- (ongoing) NLA, AJH to identify owner for TropChem item in the Desirable changes not Tested Table. AJH to arrange call with NLA to discuss this and creation of rose-stem jobs. Should also update the UKCA UMDP to reflect which configurations are supported/widely used.
- ongoing
- (ongoing) JH, AJH, NLA breakdown bigger priority items into milestones. The API has hit its first milestone
- closed
- (ongoing/new) NLA to set up a release notes page on the UKCA trac following the 13.4 release, add more milestones, add a "hopefully" milestone, and add an "API" keyword to the working practices
- (new) PMJ to send NLA the details of the simple column job he has developed for the NAME work
- ongoing
- (new) MR to send details of Git migration to NLA
- closed
- (new) JH to make page on UKCA trac to document the allowed 7 UM modules. NLA to link to working practices.
- closed
- (new) NLA to send round Doodle Poll for November.
- closed
Standing actions
- (ongoing - standing item) CMG to monitor list of bugs and circulate between group for owners.
- (ongoing - standing item) At CMG future meetings there should be included an appendix listing the open bugs. If a ticket is included it is not an open bug (as the owner of ticket is person doing lodging).
- (ongoing - standing item) ALL with access to keep monitoring ukca_bugs email list.
- (ongoing - standing item) ALL to think about if code changes will change KGO and let systems team know in good time, and remember to include the UKCA keywords to all UKCA tickets. This should be a standard part of our working practice. Note also the required keywords.
- (ongoing - standing item) ALL to note, review, and remove obsolete/redundant code
- (ongoing - standing item) ALL closed ticket owners to produce a summary of their change for the UKCA newsletter for special occasions, e.g. to coincide with Composition-Climate Meeting.
- (ongoing - standing item) Code Owner to produce draft newsletter for CMG to approve.
- (ongoing - standing item) ALL to consider other rose-stem tests that could be included.
- (ongoing - standing item) ALL to email NLA with suggestions for next set of tutorials.
Tickets (NLA)
Tickets on MOSRS:
- UM Tickets: October 2023 (UM13.4)
- UM Tickets: ~February 2024 (UMXX.Y)
- LFRic Tickets: Ariel (November 2023)
- LFRic Tickets: Bianca (February 2024)
- UKCA Tickets: UM Autumn 2023
- UKCA Tickets: UM Spring 2024
- UKCA Tickets: UM Summer 2024
- UKCA Tickets: UM Autumn 2024
PLEASE REMEMBER TO USE THE UKCA KEYWORD FOR ALL UKCA CHANGES
NOTE: The UM requirement for LFric testing
of all changes under UM:src/atmosphere, UKCA:src/science, and UKCA:src/control/core
Please also give any feedback on the UM release cycle to NLA to pass-back to UM Sys.
Message from UM Sys - please take care when considering keywords. It is important to get these correct for the Code Review process.
AJH highlighted LFRic changes next release which developers may need to be careful of.
Update on UKCA API redesign (JH)
This is now basically done, as the diagnostics ticket was the last major change. There are instructions in UMDP and JH will make an example branch. New diagnostics should be added using the new mechanism - if anyone has any issues contact JH.
This standing item will be removed from future meetings, as any API discussion will be covered in other areas, e.g. tickets or bugfixes.
Progress with Priorities (NLA)
ACTION REQUEST FROM UKCA SCIENCE & MANAGEMENT BOARD: CMG to provide list of priorities & their status, with particular thought to UKESM2 changes that will be required.
The current priorities are:
# | Description | Owner | Desirable for UKESM2? | Status | Comments from this meeting | Complete |
---|---|---|---|---|---|---|
1 | UKCA API | John Hemmings (main) | No | UKCA API work is progressing (AJH). Radaer API on hold until after GA7 port to LFRic. Functionality of RADAER in LFRic currently works without an API although it will be preferable to update this in future. Main task complete |
Main task complete Some follow up tasks have been created |
Yes |
2 | UKCA and NAME coupling | John Hemmings (main) | No | ukca:#25 was lodged for UM13.2 Now working with RAQ. PMJ has been able to build UKCA as a shared library for NAME use. |
Work complete on UKCA side Science testing started with NAME |
Yes |
3 | Review UKCA tests to cover all requirements | Luke Abraham / Mohit Dalvi | Will cover these in a table in future for review. Updated testing coverage on Linux and can run 1x1 decomposition |
|||
4 | Updates/fixes to GLOMAP routines | not Adrian | YES | AH asked about the stratospheric changes from a UKESM2 context, and whether there is any help for these. | This may be the bug fixes from 1.1 Alan to check with Jane. |
|
5 | Standalone UKCA configurations | Luke Abraham/Scott Archer-Nicholls | ExCALIBUR work progressing. Aim to remove UKCA from UM trunk at vn12.3. See UKCA Box Model page |
|||
6 | Emissions flexibility | probably Mohit Dalvi??? | (a) Modify ‘ukca_set_emissions’ to handle data for 1D domains (for consistency with ukca_set_environment). |
|||
7 | Separare UKCA repository | Luke Abraham | Separate UKCA trac environment set-up on MOSRS here, will hold UKCA code on completion of current ExCALIBUR project. Aiming for vn12.3. UKCA removed from UM at UMvn13.0 - see UKCA repo Closed |
yes | ||
8 | Non-API LFRic work, e.g. Porting aerosol science functionality etc. | Alan J Hewitt | No | Porting calculation of CDNC from GLOMAP Climatology aerosols complete. I will pass required elements of ukca_radaer to ukca_radaer_band_average (um:#5957) Porting calculation of fields in radaer_band_average to be passed to Socrates underway(lfric:#2488) Includes RADAER, need to use imode_setup=8 RADAER now callable from LFRic, can do GA-type comparisons from LFRic to UM. JH to put UKCA into LFRic soon - working in an SCM configuration (GLOMAP with offox) - needs more testing. A lot more work to do, possibly until end of 2021. AJH has tickets going in for 12.1 that would cover all of the basic GA7 but with climatological aerosol. JH tickets will do the prognostic alternative. JH currently has an LFRic-SCM configuration with prognostic aerosol. JH now has UKCA working in proto-GAL7 (LFRic) config. Needs to couple with convection & plume scavenging. Convection & plume scavenging has been done. AJH - some of this has been done or is in progress. |
yes | |
9 | RADAER API | Alan Hewitt (main) | No | Radaer API on hold until after GA7 port to LFRic. Functionality of RADAER in LFRic will work without an API although it will be preferable to update this in future. Not clear if RADAER will work independently of UM in single column mode. AJH and AJ and JH and Ben Johnson and NB need to work out if desirable and practical to run independent of UM. |
||
10 | RADAER optimisation emulation |
Alan Hewitt (main) Ben Johnson |
NO | AJH highlighted that there have been some discussions about this - a few people interested in this (James Manners, AJ, Ben Johnson, AJH). AJH and others to look at emulation of RADAER |
||
11 | RADAER optimisation integration points |
Alan Hewitt Ben Johnson (main) |
NO | Have had someone looking to see if something could be changed to make it faster to make a trimmed-down version with less calculations for e.g. NWP. AJH and BJ to look at making number of integration points a user variable AJH has functionality to do 1 integration point now. BJ is going to lead this one and see what happens when run with this for use in a weather context. Would give a ~4x speed-up for RADAER. |
||
12 | Dry deposition and Jules tiles | YES | If Jules adds extra tiles for UKESM2 we may need to hard code options in dry deposition (like in um:#1761) Aerosol Dry Deposition will be considered in the JULES context once the gas-phase changes have been committed. Completed for UM13.1 |
yes | ||
13 | FastJX-GLOMAP coupling | YES | UMvn10.8 branches exist - see ticket UM:#2689 Note: FastJX rates also need updating - potential for code as well as input-file changes |
|||
14 | Cloud-J | |||||
15 | Fixes for chemistry rates and ASAD (bugs #101 & #103) | Luke Abraham | YES | #101 still open, #103 completed (necessary for GC5 ticket GMED:#551) Issues on EX1A. Closed - see also UKESM:#841 for UKCA package ticket |
yes | |
16 | Rc fixes for water (bug #104) | UKESM Core Team | YES | Lodged at UMvn11.7 in ticket UM:#5167 | yes | |
17 | CH4 deposition fixes (bug #109) | Gerd Folberth | YES | Closed | yes | |
18 | UKCA STASHmaster PP-codes | Luke Abraham | Verification system makes some use of existing PP-codes. New items should have a PP-code of 0 and verification team will use STASH items for these if required. | |||
19 | Removal of redundant code | ALL | No | Parked whilst GA7.0 is a protected suite. | ||
20 | GLOMAP-CLIM API refresh | Alan J Hewitt | No | Cuurently parked. Extend API to include GLOMAP-clim within the core UKCA code (or alternatively provide UKCA routines required by GLOMAP-clim in the UKCA API). Required to avoid the need to by-pass the API. |
||
21 | N48L85 configuration | |||||
22 | ACTIVATE optimisation | TBC | A quick win here is to reduce nwbins in namelist ( see um:#4740 ). Parked for now. There does not seem to be resource to look at this at present. This could be tested for UKESM-fast. Another potential change would be to alter the call to only when there are clouds |
|||
23 | Stratospheric Ozone improvements | James Keeble/Luke Abraham | YES UKESM:#729 |
Work ongoing, covered in ticket UM:#5641. Note: FastJX rates also need updating - potential for code as well as input-file changes See also UKESM:#841 for UKCA package ticket |
||
24 | Solar cycle in photolysis | Luke Abraham | YES UKESM:#732 |
Some code lodged at UMvn10.9 (UM:#2587) but needs bugfixing. This work has stalled in ticket UM:#4828 (bug #110). UM:#4828 lodged for UMvn12.2. See also UKESM:#841 for UKCA package ticket |
yes | |
25 | Deposition updates from CSIRO | YES UKESM:#730 UKESM:#739 |
Code lodged in UM:#4020 (UMvn11.4, oceanic dry deposition) and UM:#5713 (UMvn11.8, Lightning NOx updates). See also UKESM:#841 for UKCA package ticket |
yes | ||
26 | Sol/Insol | Anthony Jones (main) | No | ukca:#14 was lodged for UM13.2 | yes | |
27 | Glomap aerosol and GPU | Alan J Hewitt (main) Joe Abram |
No | Started at vn13.3 | ||
28 | Photolosis and GPU | Joe Wallwork Joe Abram |
No | |||
29 | ASAD Chemistry solver and GPU | Joe Wallwork | No | Working with PsyClone for this, as itdoes most of the directives. | ||
30 | Support for UM hybrid resolution model and provision of internal variables via the API | maybe MS??? | No | Required to avoid the need to by-pass the API. Currently a low priority task. Code is protected by rose-stem so do not need to fix this urgently. |
MS has little time to work on this at present. An edge case for API usage. | |
31 | Removal of unnecessary UM module dependencies in LFRic builds | Richard Gilham (main) | No | LFRic currently uses the UM version of ukca_um_legacy_mod which is dependent on a large number of modules (e.g. STASH system modules) that are not required. In principle, this could be fixed by an LFRic version of ukca_um_legacy_mo. Rich has been looking at an alternative method using compiler directives (see Ticket ukca:#123 Purge usage of copydiag and friends for non-UM use cases). |
Bugs/Bugfixes (NLA)
Open Bugs
# | Description | Ticket | Owner | Comments | Comments from this meeting |
---|---|---|---|---|---|
124 | H2 and N2 cannot be set for RCP and WMOA1 scenario routines | UM:#5620 | Mohit Dalvi | Values are hard-wired in the code and cannot be changed without a branch Will be handled at UM11.8 At least for the next version Keep open Tested it quickly - N2 is used from namelist but not obvious, but H2 needs further testing |
|
128 | Bug in UKCA stratospheric chemistry diagnostics | UM:#5839 | Luke Abraham | pre-UMvn10.0. The indexing/values of diagnostics m01s50i101-i104 are incorrect. Fixes provided for vn11.1 and vn11.7. May affect CMIP6 diagnostics May be best to lump #101. NLA to contact JM Should be fixed for UKESM2 Biggish ticket for 12.2 with bug fixes. See if can be done for 12.3 Nice to do ASAP, but if just diagnostics might be able to do at a later time. |
|
136 | There appears to be a bug in some Section 51 diagnostics. | 6598 | 51996 and 51999 are fine. 51921 and 51922 are broken. Other fields unknown. Problem uncovered during 6358 May just linger. Should we take the broken ones out? MD has opened a ticket to see which ones fail and which ones work MD has tested, some things came up, need to be re-tested again. |
Fixed code/ STASHmaster to be able to produce All P-level diagnostics from Strattrop and CRI-Strat at UM13.3 (except those from #147 below). Will attempt to lodge fixes for UM-Feb-24 release. | |
140 | Heaviside Function cannot have multiple level sets | um:#6816 | The Heaviside function needed to scale UKCA pressure-level diagnostics is valid only for a single set of pressure levels from Stash requests. If some Sec 51/52 diagnostics are requested on say 19 pressure-levels and the same/ different ones on 36 pressure-levels, the Heaviside field in output will be applicable to only one of these. May be able to request multiple Heaviside functions The UM is able to do this for other Heaviside functions for climate diagnostics. |
Checked at UM13.3; a separate copy of Heaviside can be produced for each set of pressure levels (Stash collates all the level sets into a single array for calculation before re-distributing for diagnostic write.) | |
143 | Error in print statements from UKCA_TRACERS_COPY_FROM_UM | The final species listed in the diagnostic print statement seems to have very large concentrations (O(1E+08)) compared to others in the ppm-ppt range. Does not seem to affect model output. Reported by James Weber. | |||
144 | interchangeable use of specific humidity and water vapour mixing ratio | #6813 | UKCA includes calculations of relative humidity, clear-sky relative humidity and saturation vapour pressure. Relative humidity calculations should be based on water vapour mass mixing ratio but are in part based on specific humidity. Also, the calculation of saturation vapour pressure is derived from saturation mixing ratio but uses a formula for deriving SVP from saturation specific humidity. This interchangeable use of specific humidity (ratio for moist air) and mixing ratio (ratio for dry air) in existing configurations introduces small numerical errors in UM and LFRic model runs. These bugs were identified at UM version vn12.2 and have been highlighted by comments in code lodged with UM ticket #6660 (in ukca_main1-ukca_main1.F90 and atmos_ukca_humidity_mod.F90). All UKCA configurations are affected. JH doesn’t think it’s complicated but not particularly trivial either. |
||
145 | all_ntp not explicitly dimensioned in UKCA_MAIN | Possible fix here | all_ntp not being dimensioned explicitly in ukca_main1-ukca_main1.F90. Highlighted in NCAS CMS ticket https://cms-helpdesk.ncas.ac.uk/t/nested-ukca-suite-on-archer2/604 raised by Paul Field. Grenville Lister has found the cause and implemented a possible fix https://code.metoffice.gov.uk/trac/um/changeset/110132/main/branches/dev/grenvillelister/vn12.0_all_ntp_fix |
||
147 | Missing products in Sec-50 diagnostics: Mismatch in ukca_chem_master and asad_flux_dat 50-092 STRATOSPHERIC OH LOSS (B153) Products for (OH + H2) changed under scheme v121 but not reflected in asad_flux_dat 50-123 STRAT O3 LOSS: HO2 + NO3 (B61) Product O2 not available for StratTrop After chem v121/ always |
Luke Abraham | NLA to take a look | ||
149 | CRI-Strat photolysis bug | ukca:#29 um:#7205 |
John Hemmings | There is a bug that causes the wrong photolysis rate field to be output for the JNO2 diagnostic when using the CRISTRAT scheme. This results from an indexing problem in photol_diags in ukca_um_photol_ctl_mod.F90 (UM vn13.2) causing the wrong photolysis rate field to be output. In lines 641-667, the loop used to find the index for accessing the required field data in ‘photol_rates’ relies on finding the position of the ‘jno2’ label in the ratj_varnames array and does not stop searching until the end of the array. In the CRISTRAT scheme there are multiple ‘jno2’ labels with different quantum yields and only one (with yield = 100%) is the correct one for the NO2 reaction. The others are for different reactions whose rates are derived from that. The index selected will be the last of the ‘jno2’ entries which is for the wrong reaction when there are multiple entries. The same processing is used for other photolysis rate labels but I don’t think these have multiple entries. The ratj_varnames array referred to above is returned by a call to the ukca_get_photol_reaction_data API routine (dummy argument varnames_ptr). It holds the fname component of the ratj_defs structure for each photolysis reaction in the chemistry scheme. The inline documentation for this routine in ukca_chem_defs_mod.F90 does not indicate that the list returned may contain duplicates. This should be made clear to reduce the risk of misuse in future. The bug will be corrected by UKCA:#29 and linked UM ticket #7205. These tickets will remove the existing UM-side code for the photolysis rate diagnostics and replace it with code using the new UKCA diagnostic handling scheme. This will access jrates after their input to UKCA as environmental driver data not before and it uses a more robust method to index the correct fields. |
|
150 | ukca_ddepctl bug for 27 tiles | ukca:#19 | Will alter results of 27 tile ukesm1 runs. Fixed in Jules code by Garry, so no bug in UKESM2. Will affect any job where ice isn’t the last tile. Not that not all UKCA configurations use JULES - e.g. ACCESS May not fix in UKCA - will only fix in JULES repo. If it’s a small enough change, JM may sign off the fix. Will still be a while until CSIRO will use the latest UM versions. || | ||
151 | minor UM depdency bug | ukca:#29 | A minor dependency bug in ukca_emiss_diags_mode_mod.F90 was introduced by Ticket #34 where the copydiag routine is used directly from the UM module copydiag_mod. This means that at um13.3 an extra UM module is required to build UKCA outside the UM e.g. when coupling with NAME. Instead, the routine should be used from the module `ukca_um_legacy_mod` allowing it to be replaced with a stub in non-UM builds. | ||
152 | correct bug in water_content_v | ukca:#130 | Dan Grosvenor and Alan J Hewitt |
The code appears to be different to the description in the text book Fundamentals of Atmospheric Modelling |
ACTION: DG and AJH to chat offline regarding bug #152 (correct bug in water_content_v) |
Redundant Code (NLA)
Code for deletion
PLEASE REMEMBER TO EDIT THE ORIGINAL REDUNDANT CODE TABLE AND NOT THIS PAGE
- The NG-Composition Project Board has agreed to use the Redundant code table as the Technical Debt Log for UKCA as part of that project. This has highlighted the issue that some areas of code are not listed as being redundant, but are also not tested/used routinely and are not in any rose-stem tests, for example 2D photolysis and the TropIsop and Strat chemistry schemes. We have been asked to review this code and list untested code which is still desirable to be included for testing, and to ensure that other areas of code are listed for deletion.
- It is noted that we may have more time to work on these once LFRic work is done, and most can't be retired as under rose-stem for GA7.
# | Description | Ticket | Remarks | Status | Timeframe | Owner | Comments from previous meetings | Comments from this meeting |
---|---|---|---|---|---|---|---|---|
4 | ukca_strat_update.F90 - relax_ozone | UM:#1505 | None | PROPOSED | Medium-term | Luke Abraham | ||
5 | Backward Euler Standard Tropospheric Chemistry | UM:#1507 | None | PROPOSED | Medium-term | Fiona O'Connor | ||
6 | Wet oxidation of SO2 in GLOMAP | UM:#4475 | None | PROPOSED | Medium-term | Colin Johnson | JM to look at this re: UKESM1 c.f. offline GLOMAP. JM to take ownership. Still needed for CTM. Relevance for standalone code and later coupling to CTM. |
|
7 | Updraft velocity - l_conv_tke | UM:#3668 | Proposed in December 2017. Approval being sought for GA series (likely GA8). | PROPOSED | Medium-term | Alan J Hewitt / Ian Boutle | ||
8 | All backward Euler chemistry schemes | None | Note that this is only for the “hard-coded” BE schemes. Quite a lot of work would be involved, but good as a longer-term aim. Note that problems for AQUM would need to be addressed first. | PROPOSED | Long-term | Luke Abraham | ||
9 | Deprecated UKCA netcdf attribute options | UM:#2513 | 'emission_type', string type attributes no longer recommeneded. Need some time for most new code to adopt these. Still used in AQUM files. | DEPRECATED | Medium-term | Nick Savage | AQUM are addressing the files. Have gone from operational jobs, have ticket to remove from rose-stem. LN to document. These have been removed from AQUM. AQUM work has been done. From AS: In the ancil ticket linked from #2513 (https://code.metoffice.gov.uk/trac/ancil/ticket/782) it says that GA7 depends on the old format files, and as far as I know this is still true. In the 3-step timeline suggested, we haven't reached step 2 unfortunately. That ticket was about ensuring GA8 did not use the old attributes. I believe that GA8 is due for release in the next few months (it has been a very long time coming), so UM vn11.5 may be the last version at which GA7 is supported. Do you mind waiting a bit longer? AJH to follow-up with LA |
|
10 | ASAD families chemistry | None | Families chemistry has not been used for many years (since at least UM6.1. It is likely that it no longer works if turned on, and it complicates the code making other developments harder | DEPRECATED | Short-term | Luke Abraham | ||
11 | Dry deposition 9 PFT option | None | The 13 PFT option has been adopted for UKESM1. The 9 PFT option is possibly not being used at all. Proposed in June 2018. |
PROPOSED | Long-term | Alan J Hewitt | AJH may be able to remove 9 PFT option, but it might be better to do when removing other dry-dep temporary logicals. | |
12 | Remove explicit C_SPECIES constants and calculate these from M_SPECIES and the mass of air |
None | Will have wide-ranging rose-stem KGO breakages | PROPOSED | Short-term | Luke Abraham | ||
13 | Remove temporary logical l_fix_nacl_density Introduced at UM:#2405 |
UM:#3490 | Requires AMIP testing and a GMED ticket Could be accepted to GA9 |
PROPOSED | Medium-term | Jane Mulcahy | See JM GMED action | |
15 | Remove temporary logical l_fix_ukca_impscav Introduced at UM:#1421 |
UM:#4145 | Approval being sought for GA series (likely GA9) GMED:#402 |
PROPOSED | Medium-term | Alan J Hewitt | See JM GMED action | |
16 | Remove temporary logical l_fix_improve_drydep Introduced at UM:#1250 |
UM:#3997 | Approval being sought for GA series (likely GA9) GMED:#393 |
PROPOSED | Medium-term | Alan J Hewitt | See JM GMED action | |
17 | Remove temporary logical l_fix_ukca_h2dd_x Introduced at UM:#4157 |
UM:#4245 | Approval being sought for GA series (likely GA9) GMED:#410 |
PROPOSED | Medium-term | Alan J Hewitt | See JM GMED action | |
18 | Remove temporary logical l_fix_neg_pvol_wat Introduced at UM:#4383 |
UM:#4416 | Approval being sought for GA series (likely GA9) GMED:#421 |
PROPOSED | Medium-term | Alan J Hewitt | ||
21 | Remove code behind L_use_stratclim from ukca_fastjx_mod Introduced prior to MOSRS |
UM:#4854 | This could either be properly included via a namelist or removed from the UM | PROPOSED | Medium-term | Alan J Hewitt | LA contact OW about progressing FastJX-RADAER work Ties in with API work. MD/NC to take a look, can be removed. Do as part of API. Relevant person take ownership as part of API work NC to take ownership as part of his work |
|
24 | Remove ability to use of Cambridge 2D model data from ukca_stratf.F90 | PROPOSED | Neal Carr | Need to confirm from wider community for possible tropospheric configs and other choices for top-bdy | ||||
25 | Change from using ukca_chem_master.F90 to a file-read for the chemical mechanism | PROPOSED | Short-term | Luke Abraham | Current chem_master module has compiler issues with that require changes to optimisation level on some compilers. A file read would be more flexible and would allow the mechanism to be more easily changed not requiring UM/UKCA code tickets. | |||
26 | highorder_scheme | PROPOSED | Mohit Dalvi | May need to test this in rose-stem |
Desirable Science not tested
PLEASE REMEMBER TO EDIT THE ORIGINAL SCIENCE NOT TESTED TABLE AND NOT THIS PAGE
See also the complete list of unprotected rose-stem options
# | Description | Ticket | Remarks | Owner |
---|---|---|---|---|
1 | Use of tropospheric (2D) look-up table photolysis | Still useful to compare against FastJX. May be used for a "fast" configuration. Will be doen as part of photolysis refactoring | ||
2 | TropIsop chemistry configuration | May be useful in a "fast" configuration & to drive GLOMAP-mode. Useful for low-top configurations. | ||
3 | Strat chemistry configuration | Useful for stratospheric studies, particularly with a high model top. | Luke Abraham |
Round (virtual) Table of current activities, plans
Person | Activity |
---|---|
AJH | Currently working with Science IT. |
A.O.B. & D.N.M. (NLA)
UKCA Training (NLA)
The next UKCA training course will be 29th January to the 2nd February 2024, online.
Date of next meeting (NLA)
ACTION: NLA to send round Doodle Poll for mid-January 2024