Difference between revisions of "Bugfixes (new approach)"
Line 261: | Line 261: | ||
| 114 || Bug in ukca_activate leading to droplet numbers being too high in the upper regions of continuous cloud columns || || || || [https://code.metoffice.gov.uk/trac/um/changeset/70341/ r70341] || Previously the number per m3 was replicated upwards from cloud base, but really this should be the number per kg of air to mimic what would happen in a rising air parcel (parcel expansion would lead to the number per m3 reducing with height as an air parcel rises, scaling with the air density). This is likely to make the largest difference for deep clouds where there are deep contiguous columns. || '''OPEN''' || |
| 114 || Bug in ukca_activate leading to droplet numbers being too high in the upper regions of continuous cloud columns || || || || [https://code.metoffice.gov.uk/trac/um/changeset/70341/ r70341] || Previously the number per m3 was replicated upwards from cloud base, but really this should be the number per kg of air to mimic what would happen in a rising air parcel (parcel expansion would lead to the number per m3 reducing with height as an air parcel rises, scaling with the air density). This is likely to make the largest difference for deep clouds where there are deep contiguous columns. || '''OPEN''' || |
||
|- |
|- |
||
− | | 115 || Some UKCA-related variables accessed in other parts of UM remain undefined in non-UKCA configurations <br/>Was ''Suite that does not call GLOMAP mode setup'' || [https://code.metoffice.gov.uk/trac/um/ticket/5151 UM:#5151] || || Unknown || None yet || To be lodged for 11.6 || |
+ | | 115 || Some UKCA-related variables accessed in other parts of UM remain undefined in non-UKCA configurations <br/>Was ''Suite that does not call GLOMAP mode setup'' || [https://code.metoffice.gov.uk/trac/um/ticket/5151 UM:#5151] || || Unknown || None yet || To be lodged for 11.6 || Closed || Mohit Dalvi |
|- |
|- |
||
| 116 || Problem with the "specific humidity change from UKCA" diagnostic (stashcode 50240) || <del>[https://code.metoffice.gov.uk/trac/um/ticket/5164 UM:#5164]</del> [https://code.metoffice.gov.uk/trac/um/ticket/3875 UM:#3875] || || Unknown || None yet || See information in [https://code.metoffice.gov.uk/trac/um/wiki/ticket/4819/TicketDetails UM:#4819] || '''OPEN''' || |
| 116 || Problem with the "specific humidity change from UKCA" diagnostic (stashcode 50240) || <del>[https://code.metoffice.gov.uk/trac/um/ticket/5164 UM:#5164]</del> [https://code.metoffice.gov.uk/trac/um/ticket/3875 UM:#3875] || || Unknown || None yet || See information in [https://code.metoffice.gov.uk/trac/um/wiki/ticket/4819/TicketDetails UM:#4819] || '''OPEN''' || |
Revision as of 15:35, 4 February 2020
The aim of this page is to present the information on the new bug reporting system. All bugs should be reported to ukca_bugs@metoffice.gov.uk. More details of the approach to reporting and fixing bugs is contained in the document here .
Bug fixes table
This is a list of all reported bugs, with a link to tickets with more information on the issue and branches to fix it. Some of the bugs/ issues are described in more detail on an older bugfixes page. The UM versions listed are those where the bug is known to be present. Please note however, that bugs in versions before 8.2 are not reported here, although information on some of these can be found here.
# | Description | Ticket | Affected Versions/ Config |
Branch with fix | Remarks | OPEN/CLOSED | Owner | ||
---|---|---|---|---|---|---|---|---|---|
MetO | NCAS | ||||||||
1 | Improper construction of filename for Background Aerosol data used for Fast-JX/ HetPSC |
#4283 | #439 | 8.2-8.3 | MetO: fcm:um_br/pkg/Share/vn8.2_pkg_ukca_bugfixes Puma: fcm:um_br/dev/nhsavage/vn8.2_pkg_ukca_bugfixes |
Lodged at UM8.3. Note: Likely to clash with some vn8.2 science branches. |
CLOSED | - | |
2 | SO3 missing from UKCA_CSPECIES | ||||||||
3 | MODE diagnostics indexing issue | ||||||||
4 | Correct the methane initialisation when l_prescribe_ch4 option is selected | ||||||||
5 | Logic for Heterogenous reactions under TropIsop Chem | ||||||||
6 | String length differences in Strat+Trop reaction rate definition array | ||||||||
7 | Incorrect Loop control for a Fast-JX routine | ||||||||
8 | Remove N2O from lumped N species for Stratospheric Chemistry | ||||||||
9 | Fix an initialisation issue that caused consecutive runs to give different results | ||||||||
10 | Incorrect read-size for a Fast-JX lookup table | ||||||||
11 | Minor write statement formatting issues | ||||||||
12 | Minor variable/ array initialisation issues. | ||||||||
13 | Missing initialisation of COS LowBC | #4956 | #651 | 8.2 CheST+Aero |
MetO: fcm:um_br/dev/hadfo/vn8.2_ukca_COSmmr_bugfix Puma: fcm:um_br/dev/foconnor/vn8.2_ukca_COSmmr_bugfix |
Lodged at UM8.2 | CLOSED | - | |
14 | UKCA Age-of-Air setup bug | #5175 | #636 | 8.2-8.5 AgeAirOnly |
MetO: fcm:um_br/dev/hadzm/vn8.5_ukca_AgeAirOnly_fix Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at UM8.5 | CLOSED | - | |
15 | Incorrect factors for MODE emiss diagnostics | Part of #4301 |
#636 | 8.4-8.5 GLOMAP |
MetO: Included in fcm:um_br/dev/hadcj/vn8.4_ukca_combined_scav fcm:um_br/dev/hadcj/vn8.5_ukca_combined_scav Puma: fcm:um_br/dev/cce_cj/vn8.4_ukca_combined_scav fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at UM8.5 | CLOSED | - | |
16 | Array Dimensioning/ Indexing issues affecting ENDGAME |
#5420 | #636 | 8.4-8.5 EG+UKCA |
MetO: fcm:um_br/dev/hadzm/vn8.5_ukca_dims_uninit_fixes Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at UM8.5 | CLOSED | - | |
17 | Activate: Value underflow trap combined with debug-level | Part of #5420 |
#636 | 8.2-8.5 Activate |
MetO: Included in fcm:um_br/dev/hadzm/vn8.5_ukca_dims_uninit_fixes Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at UM8.5 | CLOSED | - | |
18 | Errors in UKCA CheST+Het/PSC setup code | #5465 | #652 | 8.5 CheST+ Het/PSC |
MetO: fcm:um_br/dev/fris/vn8.5_fix_het_psc Puma: fcm:um_br/dev/foconnor/vn8.5_fix_het_psc |
Lodged at UM8.5 | CLOSED | - | |
19 | Change in UKCA results when print/ debug level is changed |
#5470 | #636 | 8.2-8.6 GLOMAP |
MetO: fcm:um_br/dev/hadzm/vn8.6_ukca_fix_prstatus_diff Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at UM8.6 | CLOSED | - | |
20 | Failures in asad_chem_diags when Print-level=Diag and using UmPrint as Asad debug output exceeds buffer size |
Part of #5470 | #650 | 8.6 | MetO: Included in fcm:um_br/dev/hadzm/vn8.6_ukca_fix_prstatus_diff Puma: fcm:um_br/dev/mdalvi/vn8.6_ukca_remove_asad_prints |
Lodged at UM8.6 | CLOSED | - | |
21 | Incorrect calculation of some ASAD 3-D diags | #5922 | #636 | 8.2-8.6 | MetO: fcm:um_br/dev/hadlk/vn8.6_UKCA_3Demis_FixUnits Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at UM8.6 | CLOSED | - | |
22 | Indexing bug - sin_v_latitude | Part of #5420 |
#636 | 8.5 EG+UKCA |
MetO: Included in fcm:um_br/dev/hadzm/vn8.5_ukca_dims_uninit_fixes Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at UM8.5 | CLOSED | - | |
23 | Bug in Fast-JX mass calculation | #5404 | #565 Also #636 |
7.3: FastJX |
MetO: fcm:um_br/dev/frtf/vn8.4_fastj-x_debug Puma: fcm:um_br/dev/luke/vn8.4_FJX_dm_3d_bugfix fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Seems to mostly affect Low-top or hi-res runs. Lodged at vn9.0 |
CLOSED | - | |
24 | Erroneous 50% reduction factor in aerosol sedimentation velocity calc |
Part of #6105 | Part of #647 | 8.2: GLOMAP |
MetO:Included in fcm:um_br/dev/frjy/vn8.4_ukca_vgrav_av fcm:um_br/dev/hadfo/vn8.6_ukca_bugfixes_package_for_GA7 Puma: fcm:um_br/dev/dan2012/vn8.4_Sedimentation_Fix fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at vn9.0 | CLOSED | - | |
25 | ACTIVATE uses saturation mix ratio instead of saturation vap pressure |
Part of #6105 | #636 | 8.2: ACTIVATE |
MetO: fcm:um_br/dev/frjy/vn8.4_ukca_vgrav_av fcm:um_br/dev/hadfo/vn8.6_ukca_bugfixes_package_for_GA7 Puma: Included in fcm:um_br/dev/dan2012/vn8.4_Nenes_Activate fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at vn9.0 | CLOSED | - | |
26 | TropChem: uses mmr instead of vmr for Q | Part of #6105 | #636 | 8.2: TropIsop |
MetO: fcm:um_br/dev/hadfo/vn8.6_ukca_bugfixes_package_for_GA7 Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at vn9.0 | CLOSED | - | |
27 | Erroneous reaction rate for OH+MGLY reaction | Part of #6105 | #636 | 8.2: | MetO: For StratTrop/CheST fcm:um_br/dev/hadfo/vn8.6_ukca_bugfixes_package_for_GA7 for TropIsop Included in: fcm:um_br/dev/hadfo/vn8.4_ukca_ update_tropisop_rate_coeffs Puma: For StratTrop/CheST fcm:um_br/dev/foconnor/vn8.4_ukca_bugfix _StratTrop_OHMGLY_rxnrate For TropIsop/CheT: Included in fcm:um_br/dev/foconnor/vn8.4_vn8.4_ukca _update_tropisop_rate_coeffs fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at vn9.0 (StratTrop only) | CLOSED | - | |
28 | Indexing bug - all_tracers array in Plume Scavenging branch |
Part of #6105 | None | 8.4: EG+Plume Scav |
MetO: Included in fcm:um_br/dev/hadfo/vn8.6_ukca_bugfixes_package_for_GA7 Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at vn9.0 | CLOSED | - | |
29 | Indexing bug - asad_chemdiags%diag_type in asad_tendency_ste | Part of #6105 | #636 | 8.2: | MetO: Included in fcm:um_br/dev/hadfo/vn8.6_ukca_bugfixes_package_for_GA7 Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at vn9.0 | CLOSED | - | |
30 | Indexing bug - f3_at_u | Part of #6105 | #636 | 8.4: EG+UKCA |
MetO: Included in fcm:um_br/dev/hadfo/vn8.6_ukca_bugfixes_package_for_GA7 Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at vn9.0 | CLOSED | - | |
31 | FP exceptions in asad_sparse_vars or asad_spimjmp |
#5616 UM:#368 |
#555 | 7.3: CheT+Aero |
MetO: fcm:um_br/dev/fris/vn8.4_increase_rafeps Puma: fcm:um_br/dev/nhsavage/vn8.4_increase_rafeps |
Temporary Work-around. May not work in all cases CLOSED as not seen any more. May re-open |
CLOSED | Nick Savage | |
32 | ACTIVATE:uses cloud_liq_water (diagnostic) which is not consistent with cloud fraction (prognostic) |
Part of #6105 | #636 | 7.3: ACTIVATE |
MetO: fcm:um_br/dev/hadfo/vn8.6_ukca_bugfixes_package_for_GA7 Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at vn9.0 | CLOSED | - | |
33 | RADAERv2 in UMUI: Look-up table files linked to wrong Unit numbers | None | None | 8.5-8.6 | Enter _an_ files for accumulation mode and _ac_ files for the aitken/insol accum mode boxes on the RADAER panel |
No code change involved | CLOSED | - | |
34 | ACTIVATE: Argument dimensions not compatible with ENDGame (should specify 1:model_levels) |
Part of #6105 | #636 | 8.5: EG-Activate |
MetO: Included in fcm:um_br/dev/hadfo/vn8.6_ukca_bugfixes_package_for_GA7 Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
Lodged at vn9.0 | CLOSED | - | |
35 | Error in labelling: Surface resistance <--> stomatal resistance ? | #6417 UM:#1409 |
#653 | 7.3: | None | Will be folded into larger dry deposition work plan | OPEN | Fiona O'Connor | |
36 | Error in calculation of Column Ozone diagnostic | UM:#102 UM:#564 |
7.3: | MetO: fcm:um_br/dev/hadvh/vn8.2_coloz_fix Puma: fcm:um_br/dev/foconnor/vn8.2_coloz_fix |
Lodged at vn10.1 as part of the UKCA bugfix package vn10.1_ukca_bugfix_package under ticket UM:#564 |
CLOSED | - | ||
37 | Mismatch in levels for UKCA non-transported prognostics/ chem_diags. Dimensions not compatible with ENDGame |
#6376 | #649 | 9.1 ENDGame-UKCA |
MetO: fcm:um_br/dev/hadzm/vn9,1_ukca_fix_chemdiag_levs Puma: fcm:um_br/dev/mdalvi/vn9.1_ukca_fix_chemdiag_levs |
Lodged at vn9.1 | CLOSED | - | |
38 | Missing logical for volcanic so2 emissions. | UM:#1350 #6418 |
#656 | MOSRS: branches/dev/mohitdalvi/vn10.5_make_volc_so2emiss_optional |
Lodged at 10.6 | CLOSED | Mohit Dalvi | ||
39 | Fast-JX fails if .NOT. L_PC2 and .NOT. l_3d_cca | #6443 | #667 | 8.2-9.1 | MetO: fcm:um_br/dev/fris/vn9.1_fastjx_index_bug Puma: fcm:um_br/dev/nhsavage/vn9.1_fastjx_index_bug |
Lodged at vn9.1 | CLOSED | - | |
40 | UKCA fails if MODE switched Off 10m wind not in D1 but req for AeroChem |
Part of UM:#112 |
9.1 UKCA+AeroChem; MODE & CLASSIC Off |
MOSRS: fcm:um.xm_br/dev/mohitdalvi/vn10.0_ukca_update_app |
Lodged at vn10.0 | CLOSED | - | ||
41 | OC biomass burning emissions - incorrect conversion. Assumes emissions as kg POM, but (new) ancils are kg C |
#6429 | vn8.5: | MetO: fcm:um_br/dev/fpbj/vn8.6_ukca_mode_BBOC-POM_bugfix Puma: None |
The scaling up of OC to POM is now expected to be done when creating the ancils. In the netcdf system the units (i.e. OC or POM) will be explicitly given in the meta data to avoid this problem. | CLOSED | - | ||
42 | RADAER lookup table reading bug. Input values not passed to RADAER |
#6616 part of MOSRS UM:#112 |
vn9.2: with RADAER |
MetO: fcm:um_br/dev/hadzm/vn9.2_ukca_fix_radnml_read MOSRS: fcm:um.xm_br/dev/mohitdalvi/vn10.0_ukca_update_app |
Lodged at vn10.0 | CLOSED | - | ||
43 | Reconfiguration bug. L_UKCA used for setting tr_levels before RUN_UKCA is read |
vn8.3:vn9.0 UKCA with Classic fully Off |
MetO: fcm:um_br/dev/hadzm/vn8.6_fix_rcf_stshcomp_ukca Puma: None |
Automatically fixed under STSHCOMP rationalisation at vn8.6 (#5331) |
CLOSED | - | |||
44 | Logicals set to default TRUE: l_ukca_ibvoc: aborts if JULES copy is not set. l_ukca_plume_scav: non-GLOMAP (e.g. Age-Air only) run crashes. |
part of MOSRS UM:#112 | vn9.2: UKCA | MOSRS: fcm:um.xm_br/dev/mohitdalvi/vn10.0_ukca_update_app | Lodged at vn10.0 | CLOSED | - | ||
45 | nlev is not passed to asad_impact in asad_cdrive | UM:#252 | All versions | MOSRS: fcm:um.x_br/dev/scottwales/r1974_asad_impact_argument |
See MOSRS ticket UM:#252. Lodged in vn10.0. EXBUG from NCI. | CLOSED | - | ||
46 | Inconsistent use of wet_levels and model_levels in UKCA_AERO_CTL 1-D arrays |
None | All versions | None | Impact if wet_levels/= model_levels, but this option has never been supported for New Dynamics or ENDGAME and wet_levels is being retired by UM:#425 from 10.2. |
CLOSED | - | ||
47 | Dimension mismatch: q_chem, t_chem not considering extra level for ENDGame |
UM:#379 | ENDGame-UKCA | Example fix here (MOSRS) | Lodged at UM10.1 as part of UM:#239 |
CLOSED | - | ||
48 | Bugs in RADAER - dimensions, asymmetry param | UM:#380 UM:#564 | All RADAER | Example fix here (MOSRS) and here (MOSRS) | Leads to div-by-zero error in rescale_phase_fnc. Lodged at UM10.1 as part of the UKCA bugfix package under ticket UM:#564 |
CLOSED | - | ||
49 | UKCA emissions: incorrect number, un-initialised slots in all_emissions() |
UM:#381 | All UKCA | Example fix here (MOSRS) | Lodged at vn10.2 as part of UM:#805 |
CLOSED | Mohit Dalvi | ||
50 | ukca_solve_coagnucl failures | UM:#319 | UKCA-GLOMAP | Example fix here (MOSRS) | Mainly a workaround To be lodged |
CLOSED | Mohit Dalvi/Graham Mann? | ||
51 | Units of wetland emissions | UM:#571 | All versions | Example fix here (MOSRS) | Wetland emissions misinterpreted as gridbox mean rates rather than a land fraction rate - Lodged at UM10.1 as part of the UKCA bugfix_package under ticket UM:#564 |
CLOSED | - | ||
52 | PSC surface area set to zero? | UM:#609, UM:#595 | UKCA with l_het_psc | Lodged at UM10.4 595 corrects GLOMAP aero surf area units, 609 corrects logic for using Clim/CLASSIC/GLOMAP aero surf area |
CLOSED | Mohit Dalvi/ Luke Abraham | |||
53 | UKCA RADAER namelists aren't read on the Cray | UM:#577 | RADAER, some platforms only | Change to input files, not code M. Richardson to share info on back porting' |
Files have been edited after vn10.1 by Sytems Team : for older versions here is a Namelist workaround | CLOSED | - | ||
54 | Offline oxidants Chemistry: Diagnostics not properly initialised |
UM:#659 | Offline Chem | vn10.3.1_ukca_correct_oxidants | Lodged at UM10.3 | Closed | |||
55 | Use of trigonometric variables e.g. f3_at_u not consistent with ENDGame |
UM:#658 | All UKCA | vn10.2_ukca_bugfixes_package | Lodged at UM10.2 as part of #805 | CLOSED | Mohit Dalvi | ||
56 | Array size issues with UKCA tracers when using EG limited area models | UM:#682 | ENDGAME UKCA LAMs | MOSRS: vn10.1_ukca_eg_array_dims | to be lodged at UM10.2 | lodged at UM10.2 | CLOSED | - | |
57 | Incorrect logic for DMS anciliaries required | UM:#756 | UKCA jobs not using CLASSIC but without DMS in chemistry |
MOSRS: vn10.1_aqum_eg_fixes | Model stops with message about missing input. Low priority - rare edge case with informative error message. See UM:#2814. |
CLOSED | Nick Savage | ||
58 | Fastj-X runs on patches all in dark | UM:#1360 | UKCA jobs using FastJ-X | None yet | Optimisation not bug. Ticket stays open but does not belong here | CLOSED | Nick Savage | ||
59 | Mismatch in levels while reading CDNC from D1 under ENDGame |
UM:#704 | EG-UKCA vn9.0+ with Indirect effects |
MOSRS: vn10.0_fix_cdnc_lev | Lodged at UM10.2 | CLOSED | Mohit Dalvi | ||
60 | Model failure with PrStatus_Diag | UM:#784 | UKCA on Cray | MOSRS: vn10.2_ukca_prstat_diag_fixes | Lodged at UM10.2 | CLOSED | Mohit Dalvi | ||
61 | MPI BCAST bug in NetCDF emiss code | UM:#782 | vn10.1 UKCA with Netcdf emiss |
MOSRS: vn10.2_ukca_netcdf_bcastbug | Lodged at UM10.2 | CLOSED | Mohit Dalvi | ||
62 | Inconsistency in aero_surf area used in heterogeneous reactions routine |
UM:#778 | UKCA+ het | Fixed as part of #98 (non transported prognostics | Closed | ||||
63 | Inconsistency in timestep/ interval calculation for BE-Offline scheme |
UM:#774 | All BE Offline | vn10.2_ukca_repair_interval | Lodged at vn10.2 | CLOSED | Colin Johnson | ||
64 | Very low cloud fraction values can cause failures in Fastj/jx |
UM:#757 | Any | Temporary fix: vn10.2_ukca_acf_zero |
Temporary workaround lodged at vn10.2 |
CLOSED | - | ||
65 | qcl not correctly initialised in ukca_calc_aqueous_6a |
Part of UM:#805 | UKCA run with 6A convection |
MOSRS: vn10.2_ukca_bugfixes_package | Lodged at UM10.2 | CLOSED | Mohit Dalvi | ||
66 | Crash in NetCDF emissions and oxidants routines when using NetCDF-4 libraries |
NA | vn10.0-10.2 UKCA + NetCDF |
MOSRS: vn10.2_ukca_readnc_offline_fix | Automatically fixed as part of UM:#282 | CLOSED | - | ||
67 | Error in indexing of Radiative gases array. Radiation sees MMR of the wrong ('next') species |
UM:#1150 | All EG-UKCA with gas-radiative feeback |
MOSRS: vn10.2_grgas_addr_fix | Lodged at UM10.3 | CLOSED | Marc Stringer (UKESM) | ||
68 | HO2 heterogeneous loss rate 1st order(?) | No ticket | No ticket | Strat-Trop and Tropisop with l_ukca_trophet=TRUE | None | This may be correct | CLOSED | Nick Savage | |
69 | Inconsistency between aerosol size and mmr/Nd. wetdp and drydp not recalculated after aerosol remoding |
UM:#1089 | ALL UKCA- GLOMAP. | MOSRS UM10.2: vn10.2_ukca_wetdp_drydp_recalc_bug [MOSRS UM10.3: vn10.3_ukca_wetdp_drydp_calc_fix |
Leads to unphysical large spikes in AOD. Believe UM7.3 jobs may be unaffected but haven't checked. Lodged at UM10.4 |
Closed | |||
70 | Age-of-air only configuration does not work at UM10.3 | part of UM:#1171 | UM10.3 Age-air-only | MOSRS: vn10.3_ageair_and_minor_fixes | Lodged at UM10.3 | CLOSED | Mohit Dalvi | ||
71 | Minor bugs flagged up by rigorous compilation flags: dust_flux: array not allocated if L_dust=False, but passed regardless to ukca_new_emiss_ctl soil_layer_moisture: first dimension=0 if no land on PE. advt(): variable used in loop over total tracers when size is jpctr (=chem_tracers). nldepx: out-of-bounds with Offline oxidants scheme. Size of array should be 6+jpspec, based on information from ASAD developer. |
UM:#1171 | UKCA+NetCDF emiss | MOSRS: vn10.3_ageair_and_minor_fixes | Lodged at UM10.3 | CLOSED | Mohit Dalvi | ||
72 | UKCA Dry Deposition: Surface resistance values not set for some species |
UM:#1250 | UM7.3+ | MOSRS: vn11.0_surface_resistance | Lodged at vn11.1 Follow-on ticket to remove temporary logical (l_fix_improve_drydep) UM:#3997 |
CLOSED | - | ||
73 | UKCA-GLOMAP: MDT< MDTMIN warnings from GA6+ runs | UM:#1251 | UM7.3+ | None yet | To be Lodged | CLOSED - see UM ticket UM:#1332 | Graham Mann | ||
74 | Bug in ukca_tropopause with definition of PV tropopause Fix to be combined with Bug 75 below |
UM:#1283 New ticket UM:#1367 |
UM10.3 | MOSRS: vn10.6_ukca_tropopause_amendment | Scope extended to include modifications to print statement. To be Lodged, but isn't sufficient to fix STE flux diagnostics Lodged at vn11.2 |
CLOSED | Mohit Dalvi | ||
75 | Bug in STE fluxes | UM:#1367 | ENDGame? | vn11.1_ukca_fix_o3_ste | Lodged at vn11. | CLOSED | Mohit Dalvi | ||
76 | Scale Lightning emissions | UM:#1310 | UMvn7.3+ | vn10.2_scale_lightning_nox works but scaling is to be added as namelist variable for lodging purposes | Lodged at 10.5 | CLOSED | - | ||
77 | Bug in microphysics process rates used by GLOMAP which leads to process rates being ~O(10) times too low and hence too small aerosol removal. The aerosol removal has to be tuned in response to this bugfix | bugfix: UM:#367 Tunings: UM:#854 | GA4 + Configs [tunings applied in GA7 development +) | Bugfix: vn10.2_mphys_bugs_improvements Tunings: vn10.2_ukca_asnow_rfrac_tune Bugfix and Tunings backported to PUMA br at UMvn8.4. Bugfix: mdalvi/vn8.4_mphys_bugfix Tuning: j.mollard/vn8.4_scav_bugfix_with_JMscavimpr [revision 20160] |
Both Lodged from UM10.3 | CLOSED | Jonathan Wilkinson/Jane Mulcahy | ||
78 | GLOMAP dust bugs: 1. Mapping of bin->mode emissions 2. incorrect STASH options codes |
UM:#1355 | UM10.2:, GLOMAP with dust |
vn10.3_ukca_dust_diag_emis_fixes | Lodged at UM10.3 | Closed | Stephanie Woodward | ||
79 | Aerosol Impaction scavenging bugs: 1. Incorrect use of Conv Frac (FC) 2. Total (conv+dyn) precip rate applied separately for convective as well as dynamic scavenging (double counting) |
UM:#1421 Retire logical at UM:#4145 |
vn7.3: GLOMAP | vn10.3_ukca_impscav_fix vn11.1_retire_l_fix_ukca_impscav |
Lodged at UM10.3 Target UM11.2 |
Closed | Stephanie Woodward Alan J Hewitt | ||
80 | H2O feedback broken under ENDGAME | UM:#1646 | All EG jobs with H2O feedback? | None | In progress | CLOSED | Colin Johnson | ||
81 | Runs with segment/ restart interval < 5 days fail due to NetCDF emiss update bug |
UM:#948 but to be fixed under UM:#162 |
UM10.2+ , NetCDF emissions | Temporary workaround: 1.vn10.3_ncdf_emiss_greg_fix. 2. Use NetCDF emissions from /projects/ukca-meto/mdalvi/ancil/daily |
Lodged at 10.6.1 | CLOSED | Alistair Sellar/ Mohit Dalvi | ||
82 | Incorrect arguments to ukca_calcminmaxndmdt.F90 | UM:#1801 | 10.2 - 10.4 | r21272 of vn10.4.1_ukca_refactorings | Causes extra output from some PEs. Does not change results. to be lodged with other refactorings | CLOSED | - | ||
83 | error in the indexing of the tot_tracer array in the convective plume scavenging | UM:#2036 | ? - 10.5 | r21272 of vn10.4.1_ukca_refactorings | the number tracer for the first active mode will not be scavenged and there will be plume scavenging happening to the passive ozone or age of air tracer if using a chemistry scheme with l_ukca_advh2o TRUE. Fix lodged at 10.6 | CLOSED | Nick Savage | ||
84 | NetCDF error when using UKCA and Nudging: Model fails with 'EM_GET_VAR_INFO: Time dimension info not found, check if em_fopen was called with option l_ignore_time = .TRUE.' | UM:#2095 | 10.2 onwards; UKCA+Nudged |
vn10.5_nudge_fixes_and_new_app Includes other Nudging bug-fix and new rose-stem app |
Lodged at UM10.5 | Closed | Mohit Dalvi | ||
85 | Failure if using UKCA as Age-air-only Error: "Type of solver (0) not recognised" (as this config does not use any chemical scheme) |
UM:#2148 | 10.5 Age-air-only e.g. GA7 w/o GLOMAP |
vn10.5_ukca_ageair_fix | Lodged as part of #1232 at 10.6.1 | CLOSED | Mohit Dalvi | ||
86 | Discontinuity in photolysis diagnostics | UM:#2286 | At least UMvn10.5 | Fixed as a side effect of #1958 | CLOSED | Fiona O'Connor | |||
87 | Possible issues with YSTORE in UKCA_CHEMISTRY_CTL. This may mean than there is no H2SO4 because of this, with impacts on GLOMAP aerosols. Need to also select the correct products in chemistry_ctl |
UM:#3245 | Following merge at vn8.2 and all subsequent versions | Combination of two different bugs - see branches/dev/lukeabraham/vn11.3_ukca_ystore |
Lodged at vn11.3 | CLOSED | Luke Abraham | ||
88 | Potential FastJX Scattering Bug | UM:#3261 | vn7.3 onwards | vn10.6.1_fastjx_scattering_fix vn10.8_fastjx_scattering_fix |
Lodged at vn10.9 | CLOSED | David Wade/Luke Abraham | ||
89 | Sea Salt Density | UM:#2405 | vn7.3 onwards | vn10.8_ukca_seasalt_density_correction |
Lodged under a temporary logical at UM10.9 (so not on by default) "l_fix_nacl_density" in namelist:temp_fixes UM:#3490 follow up ticket will review temp logical. |
CLOSED | Colin Johnson | ||
90 | Extremely high/low NOy concentrations | UM:#3400 UKESM:#469 |
vn7.3 onwards (at least) | vn10.8_ukca_nat_fixes | Will be fixed for vn10.9. Runaway HNO3 values at the surface due to BL NAT sedimentation lead to global corrections during transport, leading to large stratospheric loss with knock-on impacts to O3 and ClONO2 etc. | CLOSED | Mohit Dalvi/Luke Abraham | ||
91 | N-R offline oxidants broken at UM10.9 and a missing k index | UM:#3606 | vn10.9 for break and vn9.1 for k index |
vn10.9_fix_offline_oxidants | Lodged at UM10.9 | CLOSED | Marc Stringer | ||
92 | UMDP084 incorrectly labels 38-476 ("Liquid cloud fraction") with units "m-3". It is a pure fraction (in the range 0.0 to 1.0) and so has no unit. | UM:#3025 | Lodged at UM11.1 | CLOSED | - | ||||
93 | Inconsistent surface resistance values for organic hydro-peroxide (rooh) | UM:#1250 | Unknown | vn11.0_surface_resistance | Lodged at vn11.1 Follow-on ticket to remove temporary logical (l_fix_improve_drydep) UM:#3997 |
CLOSED | - | ||
94 | Data corruption in Age-of-Air (and possibly Passive O3) diagnostic on pressure levels | UM:#3718 | vn10.2+ | vn10.9_ukca_debug_ageair_on_plev vn11.0_ukca_ageair_and_stashm |
Lodged at UM11.0 | CLOSED | Mohit Dalvi | ||
95 | wet/dry deposition flags for ozone are not consistent | This is a feature not a bug. | CLOSED | - | |||||
96 | Output drydiam diagnostics where l_ukca_arg_act but not l_ukca_radaer | UM:#3962 | Unknown | The beginnings of a solution are found in vn11.0_ukca_drydiam_activate_wo_radaer. | Closed as a feature. This problem has been solved for the aerosol climatologies (see ticket UM:#3874) which use stash addressing rather than d1 addressing. Work will begin after re-factoring of UKCA stash handling in UM:#4367 |
CLOSED as feature |
Alan J Hewitt | ||
97 | "magic" numbers incrementing imode (e.g. . imode+4 , imode-4 , imode+3 , imode-3 ) See e.g. src/atmosphere/UKCA/ukca_calc_coag_kernel.F90 |
UM:#4284 | Unknown | Not a bug: "For the coarse soluble mode (imode=4) there is no larger soluble mode and also there is no larger insoluble mode. It is intended that, for that mode, there is no intra-modal coagulation with other modes." |
CLOSED | - | |||
98 | Incorrect usage of npft integer when npft == 9 OR 13 |
UM:#4157 | All versions with these options | vn11.1_fix_npft | Lodged at vn11.2 Follow-on ticket to remove temporary logical (l_fix_ukca_h2dd_x) UM:#4245 |
CLOSED | Alan J Hewitt | ||
99 | UKCA dry deposition ukca_aerod.F90 HBr HOBr HCl HOCl | UM:#4312 | vn7.3+ | vn11.1_dry_dep_species | Lodged at vn11.2 Follow-on ticket to remove temporary logical (l_fix_improve_drydep) UM:#3997 |
CLOSED | Alan J Hewitt | ||
100 | Negative concentrations of pvol_wat() | UM:#4383 | Unknown | vn11.2_fix_neg_pvol_wat | Lodged at vn11.2 Follow-on ticket to remove temporary logical (l_fix_neg_pvol_wat) UM:#4416 |
CLOSED | Alan J Hewitt | ||
101 | Errors in reaction rates and diagnostics | UM:#4466 | Unknown | NA | OPEN | Scott Archer-Nicolls Luke Abraham | |||
102 | Error in RESHAPE (size 3rd dimension) in ukca_main before CALL lsp_qclear |
UM:#4595 | NA | vn11.2_fix_ukca_reshape | Not a bug Testing indicates that KGO change owing to refactoring results from compiler optimisation |
Closed | Alan J Hewitt | ||
103 | Incorrect indexing of tmprc array: ASAD_SPIMPMJP | UM:#4562 | All versions | Possible fix mentioned on ticket | To be Lodged | OPEN | Scott Archer-Nicolls | ||
104 | Incorrect value for Rc for SO_2 deposition to open water | UM:#4635 | vn | vn11.0_Ocean_depo_tweaks | To be Lodged | OPEN | Catherine Hardacre | ||
105 | segmentation fault on ukca_plev_diags_mod.F90 | UM:#4625 | Unknown | vn11.2_ukca_cce_87 | Ticket lodged for UM vn11.3 | Closed | - | ||
106 | NaNs appearing when new UKCA science is turned on | UM:#4397 | Since vn11.1 | vn11.3_ukca_exp_rose_stem | Lodged at vn11.4 | CLOSED | Luke Abraham | ||
107 | Missing c_h2o conversion factor in offline_oxidants_be | um:#5118 |
vn11.1_offline_ox_solver_investigation | Code is zq(:)=RESHAPE(q(:,:,k),(/theta_field_size/)) rather than zq(:) = RESHAPE(q(:,:,k),(/theta_field_size/))/c_h2o |
OPEN | Luke Abraham | |||
108 | Incorrect stash processing of GLOMAP load*, conc* and plume_scav diagnostics | UM:#4909 | UM10.6.1+ | None yet | To be Lodged after 11.6 | OPEN | Mohit Dalvi | ||
109 | Bug in dry deposition of CH4 for 13/17/27 tiles | UM:#4913 | UM10.4+ | None yet | To be Lodged after 10.6 Gerd noted unusual CH4 output in CMIP6 runs. May need a rose stem test for H2 and CH4 drdydep code lodged at UM:#4157 |
OPEN | Gerd Folberth | ||
110 | UKCA solar-cycle routine does not pass NRUN-CRUN test | UM:#4828 | UM10.8+ | vn11.3_ukca_solcyc_nruncrun | To be Lodged after 11.5 | OPEN | Luke Abraham | ||
111 | Cloud fraction array (cloud_frac) passed with wrong number of levels Array passed as (row_length, rows, :), so offset by 1 level under ENDGame |
Part of UM:#4822 | All ENDGame versions | vn11.3_ukca_fix_cloudfrac_dim | To be Lodged for 11.5 | OPEN | John Hemmings | ||
112 | delh2so4_chem is calculated incorrectly Incorrectly "fixed" in UM:#3245 (Bug #87). |
UM:#5076 | All StratTrop+GLOMAP versions post vn8.2. Made worse post-vn11.4 if logical l_fix_ukca_h2so4_ystore is True. | vn11.4_ukca_ystore_fix | To be Lodged for 11.6 | OPEN | Luke Abraham | ||
113 | Latitude bugs affecting LAM configurations | UM:#5119 | Unknown | None yet | To be lodged for 11.6 | OPEN | John Hemmings | ||
114 | Bug in ukca_activate leading to droplet numbers being too high in the upper regions of continuous cloud columns | r70341 | Previously the number per m3 was replicated upwards from cloud base, but really this should be the number per kg of air to mimic what would happen in a rising air parcel (parcel expansion would lead to the number per m3 reducing with height as an air parcel rises, scaling with the air density). This is likely to make the largest difference for deep clouds where there are deep contiguous columns. | OPEN | |||||
115 | Some UKCA-related variables accessed in other parts of UM remain undefined in non-UKCA configurations Was Suite that does not call GLOMAP mode setup |
UM:#5151 | Unknown | None yet | To be lodged for 11.6 | Closed | Mohit Dalvi | ||
116 | Problem with the "specific humidity change from UKCA" diagnostic (stashcode 50240) | Unknown | None yet | See information in UM:#4819 | OPEN | ||||
117 | Fix call to extract_seg and insert_seg in ukca_aero_ctl | UM:#4954 | 10.7+ | None yet | See both scitech and code review of UM:#4739 | OPEN | |||
118 | lam should be REAL in acsn2o5_mod.F90 | UM:#5271 | Unknown | Fix is trivial | Requires testing will result in KGO change |
OPEN | |||
119 | Incorrect calculation for gridbox area - only affects GLOMAP-mode diagnostics | ALL versions | None yet | Calculation of volume appears correct, but area is not. This calculation is missing the factor fv_cos_theta_latitude so will not cause area to tend towards zero at the poles. It also seems to use an unnecessary approximation to the latitude difference (based on sinv_latitude ) which may break down at high latitudes. The calculation should perhaps be consistent with subsequent volume calculation but without the delta_r factor. This will likely only affect diagnostics calculated in ukca_emiss_diags_mode , where it is used to convert from kg/m2/s to mol/gridbox/s, although it is also printed out in ukca_aero_ctl . |
OPEN | ||||
120 | nr_steps warning message - eg um_n48_ga_amip_exp | UM:#XXXX | Unknown | Perhaps this should have a clean fail rather than warning? There may be a lot of rose-meta and code changes to allow nr_steps to be set in niche cases. | OPEN |
Package branches table
For every supported version, the aim will be to have a package that fixes all bugs known to exist at that UM version. The package will be supported on both the NCAS and Met Office repositories (until a single repository is created)
UM Versions | Ticket | Package Branch | |
---|---|---|---|
MetO | NCAS | ||
8.2 | #4382 | #439 | Meto: fcm:um_br/pkg/Share/vn8.2_pkg_ukca_bugfixes Puma: fcm:um_br/dev/nhsavage/vn8.2_pkg_ukca_bugfixes |
8.3 | #1 | #2 | |
8.4 | #1 | #636 | Puma: fcm:um_br/dev/mdalvi/vn8.4_ukca_fixes_from_vn86 |
8.6 | #6105 and #5404 | #647 | Meto: fcm:um_br/dev/hadfo/vn8.6_ukca_bugfixes_package_for_release_jobs Puma: fcm:um_br/dev/foconnor/vn8.6_ukca_bugfixes_package_for_release_jobs |